Kenwood KDC-MP632U Instruction Manual - Page 29
Clock Set (Menu Setting), IIBEEP, 1I0lSP, OFF'I, Select, IICLK, display., clock display, blinks.
UPC - 019048167293
View all Kenwood KDC-MP632U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. IIBEEP ONII IIBEEP OFFII Beep is heard. Beep canceled. In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the IICLK ADJ II display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [~] or [~]. 4 Exit Clock adjustment mode Press the [MENU] button. 1I0lSP ONII 1I0lSP OFF'I Keeps the display on. Turns off the display when you perform no operation for 5seconds. ~ ~ • Set the Display Illumination Control when the (page 34) is set to OFF. • When the display is off, pressing any key will turn on the display. • When the display is off, you cannot perform any operation except for the following: • Volume • Attenuator • Selecting the source • Ejecting the disc • Turning off the power • During function control, such as the Menu System, the display stays on. In Standby mode Dimmer Dimming this unit's display automatically when the vehicle light switch is turned ON. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. 1I01MON" 1I0lMOFFli The display dims. The display doesn't dim. 1I0SIONII 11051 OFF' LED fiashes. LED OFF. English I 29