Kenwood KDC-X895 Instruction Manual - Page 54
HD Radio™ tuner control, Basic Operation, Station preset memory
UPC - 019048193186
View all Kenwood KDC-X895 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Function of KTC-HR300, KTC-HR200, KTC-HR100 (Optional Accessory) HD Radio™ tuner control Basic Operation Selecting HD Radio source Press the [SRC] button. Select the "HD RADIO" display. Selecting the band Push the Control knob towards down. Switches between the FM1, FM2, FM3, and AM bands each time you push towards down. Selecting the station Push the Control knob leftward and rightward. ⁄ • The tuning mode can be changed. Refer to (page 56). • During reception of stereo stations the "ST" indicator lights up. Station preset memory Putting a station in the memory. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 2 Enter Preset memory mode Press the [PRESET] button. "Preset List" is displayed. 3 Select a number and store it in the memory Turn the Control knob to select memory number ("1" - "6"), and then press the Control knob for at least 2 seconds. Cancelling the Preset memory mode Press the [ ] button. ⁄ • If you press the [PRESET] button twice in step 2, Mix Station preset mode is entered with "Mixed Preset List" displayed. In this mode, different bands and tuner sources (Radio, Sirius, XM etc.) can be saved in the same preset layer, which allows you to recall the desired station without switching the bands or tuner sources. Maximum of six stations can be preset in the Mix Station preset mode. Once the Mix Station preset mode is set, you can enter the same mode by just pressing the [PRESET] button once in step 2. Pressing the [PRESET] button twice returns to the normal Station preset mode. 54 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U