Kenwood KDC-X896 User Manual - Page 1
Kenwood KDC-X896 Manual
View all Kenwood KDC-X896 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
KDC-X896 KDC-BT852HD KDC-X496 KDC-452U KMR-550U CD-RECEIVER INSTRUCTION MANUAL Before reading this manual, click the button below to check the latest edition and the modified pages. Check the latest edition Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U Serial number US Residence Only Register Online Register your Kenwood product at www.Kenwoodusa.com © 2011 JVC KENWOOD Corporation IM344_Ref_K_en_01 How to read this manual Function setting procedure For the procedure for selecting a setting item in the Function setting mode, see the following example: About the notation "Contents " Clicking "Contents" shown at the upper left of each page allows you to jump to the contents page. Example: Adjusting the contrast of the display 1 Enter the Function setting mode Press and hold the Control knob. "Function" is displayed. 2 Select the Contrast function item Play Mode Settings Initial Settings Clock&Date DISP&ILLUMI Tuner Settings Display Dimmer Contrast DISP NEGA/POSI Turn the Control knob to select "Settings", and then press the Control knob. Next, turn the Control knob to select "DISP&ILLUMI", and then press the Control knob. Finally, turn the Control knob to select "Contrast", and then press the Control knob. In this manual, the above operational procedure is described as follows: 2 Select the Contrast function item Select the following items using the Control knob. Refer "Settings" > "DISP&ILLUMI" > "Contrast" Press the [ ] button to return to the previous item. ⁄ • Clicking Refer near the description of an operational procedure displays this page, allowing you to confirm how to use the Control knob. 3 Set the Contrast function Turn the Control knob to select a value (1 - 30), and then press the Control knob. The previous item is displayed. 4 Exit the Function setting mode Press and hold the [ ] button.