Kenwood KVT-546DVD Owner's Manual - Page 62
Crossover Network Setup, DVD Setup
View all Kenwood KVT-546DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Setup Menu Crossover Network Setup You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover 1 1 2 2 4 3 1 Sets the High Pass Filter of the front speaker. 2 Sets the High Pass Filter of the rear speaker. 3 Sets the Low Pass Filter of the sub woofer. 4 Switches to the crossover setup screen. 2 Display the Crossover setup screen 3 Set the crossover 5 6 7 5 Sets the cross over frequency. When front speaker or rear speaker is selected in step 1: High Pass Filter adjustment When Subwoofer is selected in step 1: Low Pass Filter adjustment 6 Sets the sub woofer phase. (Only when "Subwoofer" is set to "ON" in Audio Setup and "LPF SUB FREQ" is set to other than "Through") 7 Returns to the "Audio Setup" screen. DVD Setup You can set up the DVD play. 1 Display the DVD Setup screen Touch Menu" screen (page 61). in the "Setup 2 Setup each item 1 2 3 4 5 1 Moves to the "DVD Setup 2" screen. 2 Selects a disc menu language.*1 (See , page 63) 3 Selects a subtitle language.*1 (See , page 63) 4 Selects an audio language.*1 (See , page 63) 5 Sets the dynamic range.*1 ( "Wide") The dynamic range is reduced by changing from "Wide" to "Normal" and from "Normal" to "Dialog". "Dialog" makes the total sound volume becomes larger as compared with "Wide" and "Normal", allowing you to listen to the movie's dialog more clearly. This is effective only when you are using a Dolby Digital software. The operation is available during the play stop mode. 62 KVT-696/KVT-636DVD/KVT-516/KVT-546DVD