Kenwood KVT911DVD Instruction Manual - Page 50
Switching to the Delay Time Setting
UPC - 019048139603
View all Kenwood KVT911DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
5.1 Channels Surround Processor Control Function Crossover Network Setting Screen A B CD EF G H NOTE ABDE You cannot operate when the "Sub Woofer" is set to "OFF"( see P.47 ). NOTE A You cannot operate when the "Multi channel" is set to "3/0" or "2/0" on the digital effect setting screen ( see P 47 ) . NOTE E •You cannot operate when the "Center SP" is set to "OFF" ( see P 47 ) . •You cannot operate when the "Multi channel" is set to "2/2" or "2/0" ( see P 47 ) . A Adjusting the High-pass filter for Rear output Adjust the frequency Each time you touch [ frequency as follows: ] or [ ] to adjust the THR (through) / 30Hz / 60Hz / 90Hz / 120Hz / 150Hz / 180Hz / 250Hz Adjust the slope Each time you touch [ ] or [ (12dB, 18dB and 24dB). ] to adjust slope B Adjusting the High-pass filter for Front output Adjust the frequency Each time you touch [ frequency as follows: ] or [ ] to Adjust the THR (through) / 30Hz / 60Hz / 90Hz / 120Hz / 150Hz / 180Hz / 250Hz Adjust the slope Each time you touch [ ] or [ slope (12dB, 18dB and 24dB). ] to adjust the D Adjust the frequency of the Low-pass filter for Sub Woofer output. Adjust the frequency of the Low-pass filter Each time you touch [ ] or [ ] to adjust the frequency as follows: 30Hz / 60Hz / 90Hz / 120Hz / 150Hz/ 180Hz / 250Hz Adjust the slope Each time you touch [ ] or [ slope (12dB, 18dB and 24dB). ] to adjust the E Adjusting the High-pass filter for Center output Adjust the frequency Each time you touch [ ] or [ ] to adjust the frequency as follows: THR (through) / 30Hz / 60Hz / 90Hz / 120Hz / 150Hz / 180Hz / 250Hz 50 Adjust the slope Each time you touch [ ] or [ slope (12dB, 18dB and 24dB). ] to adjust the F Setting the phase for Sub Woofer output Each time you touch [ Sub Phase ] to switch the phase as follows: " NORMAL " 0° " REVERSE " 180° G Storing Your Settings of the Crossover network/Delay time Touch [ 1 ] -[ 6 ] for at least two seconds. Recalling your settings of the Crossover network/delay time Touch [ 1 ] -[ 6 ] for the desired crossover network and delay time setting. C Switching to the Delay Time Setting Screen Touch [ DTA ] to switch to the delay time setting screen.(see p.51) H Returning to the Sound Effect Menu Screen Touch [ RTN ] to return to the sound effect menu screen.