Kenwood MP6025 Instruction Manual - Page 15

3 Exit Display control mode Press the [DISP] button. • When 'Dual Zone System' (page 27) is ON, Level meter cannot be switched. Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD. 1 Receive/play the station/disc you want to attach a title to • Refer to the 'Upper text display part select' (page 12) and select either "DNPS" or "SNPS". No name can be attached to the source if "DNPS" or "SNPS" cannot be selected for it. 2 Enter name set mode Press the [NAME.S] button for at least 2 seconds. "Name Set" is displayed. 3 Move the cursor to the enter character position Press the [4] or [¢] button. 4 Select the character type Press the [38] button. Each time the button is pressed the character type switches as shown below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) Display "A" "a" "✳" "á" 5 Select the characters Press the [FM] or [AM] button. • Characters can be entered by using a remote with a number buttons. Example: If "DANCE" is entered. Character "D" "A" "N" "C" "E" Button [3] [2] [6] [2] [3] Times pressed 1 1 2 3 2 6 Repeat steps 3 through 5 and enter the name. 7 Exit name set mode Press the [NAME.S] button. • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Memory numbers - Tuner: 30 stations - Internal CD player: 10 discs - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • The title of station/CD can be changed by the same operation used to name it. English | 15