Kenwood NX-3227 User Manual - Page 23

BASIC OPERATIONS Switching Power ON/ OFF Turn the Power switch/ Volume control clockwise to switch the transceiver power ON. Turn the Power switch/ Volume control counter-clockwise to switch the transceiver power OFF. Adjusting the Volume rotate the Power switch/ Volume control to adjust the volume. Selecting a Zone and Channel 1 Select the desired zone using the Selector or 4-way D-pad or the buttons programmed as [Zone Up]/ [Zone Down]. Each zone contains a group of channels. 2 Select the desired channel using the Selector or 4-way D-pad or the buttons programmed as [Channel Up]/ [Channel Down]. Each channel is programmed with settings for transmitting and receiving. •• The default setting for the Selector is [Channel Select]. •• The transceivers may have names programmed for zones and channels. The zone name and channel name can contain up to 12 and 14 characters respectively. While selecting a zone, the zone name will appear above the channel name. •• If programmed by your dealer, your transceiver will announce the zone and channel numbers as you change them. 23