Kenwood RFU-6100 Instruction Manual - Page 5

Operation 1 Connect your Surround Speaker with the corresponding color terminals on the Wireless Receiver (RFU-R6100). (Right: Gray, Left: Blue) Wireless Receiver (RFU-R6100) Surround Surround Speaker (R) Speaker (L) 2 Connect the Wireless Receiver (RFU-R6100) power cord to your power supply. • The Wireless Receiver (RFU-R6100) power indicator lights up green. 3 Connect the AC adapter to the Wireless Transmitter (RFU-T6100) and power supply. Use the enclosed AC adaptor (AC-150015A) for this product. 4 Make sure you position both the Wireless Transmitter (RFU-T6100) and Wireless Receiver (RFU-R6100) at least 2 meters (6.6 ft.) apart. • The control distance of the RF signal is about 30m (100 ft.) provided there is no obstacle. 5 Connect and carefully match the colors of the wires on the Wireless Transmitter (RFU-T6100) to the corresponding surround speaker terminals on your Receiver. Wireless Transmitter (RFU-T6100) Receiver Right (Gray and Black) 1 4 Left (Blue and Black) • The Wireless Transmitter (RFU-T6100) power indicator lights up green. 6 Check and adjust the 4-channel toggle switch on the Wireless Receiver (RFU-R6100) (CHANNEL SELECTOR switch) and Wireless Transmitter (RFU-T6100), so that both units are using the same channel. Wireless Receiver (RFU-R6100) Wireless Transmitter (RFU-T6100) 1 4 CHANNEL SELECTOR switch 4-channel switch 7 On your Receiver, play an audio source and activate the surround sound mode option. Adjust the volume to reproduce surround sound in the rear speakers. 8 Extend the antenna vertically on both the Wireless Receiver (RFU-R6100) and Wireless Transmitter (RFU-T6100) to improve reception. Check the antennas are safely positioned without obstruction. To ensure quality sound production and transmission • Place both the Wireless Receiver (RFU-R6100) and Wireless Transmitter (RFU-T6100) off the ground (recommended minimum height of 30cm (1 ft.)). • Avoid placing the Wireless Transmitter (RFU-T6100) too close to your Receiver, AC adapter, TV or other electrical equipment as it may cause electrical interference. • In case of sound distortion, please select another channel for both the Wireless Receiver (RFU-R6100) and Wireless Transmitter (RFU-T6100). The distortion could be the result of interference caused by other equipment using same frequency channel in your house or neighbourhood. 5 EN