Kenwood TK-3230K Instruction Manual - Page 31
Ransmit, Nhibit
UPC - 190481735918
View all Kenwood TK-3230K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
• While adjusting the VOX Delay Time, speak into the microphone to simulate transmitting. The LED lights orange while speaking, but no signal is transmitted at this time. 4 Press the MENU key to confirm the selection. 5 Press the PTT, MON, or CAL key to exit Setting Mode. VOX Transmit Inhibit While using VOX, you can set the transceiver to detect when the channel is in use (in place of using the Monitor function). With this function turned on, VOX will not allow you to transmit while the channel is being used. You can transmit only when the channel is free. Setting up the proceed tone function {page 23} will notify you when the channel is free. 1 With the transceiver power OFF, press and hold the MENU key while turning the transceiver power ON (for 1 second). 2 Press the or key to select "tI". 3 Press the MENU key then press or to select "tI-on" (transmit inhibit on) or "tI-oF" (transmit inhibit off). 4 Press the MENU key to confirm the selection. 5 Press the PTT, MON, or CAL key to exit Setting Mode. 22