Kenwood VR-615 Instruction Manual - Page 36

Specifications For the U.K and Europe AUDIO section (KRF-V5060D) Rated power output during STEREO operation DIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D., at 6 100 W + 100 W Effective power output during SURROUND operation FRONT (1 kHz, 0.7% T.H.D. at 6Ω one channel driven 100 W + 100 W CENTER (1 kHz, 0.7% T.H.D. at 6Ω one channel driven 100 W SURROUND (1 kHz, 0.7% T.H.D. at 6Ω one channel driven 100 W + 100 W Total harmonic distortion 0.05% (1kHz, 50 W, 6Ω) Frequency response (IHF'66) CD 20 Hz ~ 70 kHz, +0 dB, -3.0 dB Signal to noise ratio (IHF'66) PHONO (MM 74 dB CD 95 dB Input sensitivity / impedance PHONO (MM 6.0 mV / 27 kΩ CD 500 mV / 47 kΩ DVD/6CH INPUT 500 mV / 47 kΩ Output level / impedance TAPE REC 500 mV / 1 kΩ PRE OUT (SUBWOOFER 1.5 V / 2.2 kΩ Tone control BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) Loudness control VOLUME at -30dB level 8 dB (at 100 Hz) AUDIO section (KRF-V4060D) Rated power output during STEREO operation (DIN 1 kHz 0.7% T.H.D., at 6 50 W + 50 W Effective power output during SURROUND operation FRONT (1 kHz, 0.7% T.H.D. at 6Ω one channel driven 50 W + 50 W CENTER (1 kHz, 0.7% T.H.D. at 6Ω one channel driven 50 W SURROUND (1 kHz, 0.7% T.H.D. at 6Ω one channel driven 50 W + 50 W Total harmonic distortion 0.15% (1 kHz, 20 W, 6Ω) Frequency response (IHF'66) CD 20 Hz ~ 70 kHz, +0 dB, -3.0 dB Signal to noise ratio (IHF'66) CD 95 dB Input sensitivity / impedance CD 400 mV / 47 kΩ Output level / impedance TAPE REC 400 mV / 1 kΩ PRE OUT (SUBWOOFER 1.5 V / 2.2 kΩ Tone control BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) Loudness control VOLUME at -30dB level 8 dB (at 100 Hz) DIGITAL AUDIO section Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 96kHz Input level / impedance / wave length Optical 15 dBm ~ -21 dBm), 660 nm ±30nm Coaxial 0.5 Vp-p / 75 Ω VIDEO section VIDEO inputs / outputs VIDEO (composite 1 Vp-p / 75 Ω FM tuner section Tuning frequency range 87.5 MHz ~ 108.0 MHz Usable sensitivity (DIN at 75 Ω) MONO 1.3 µV / 13.2 dBf (40 kHz DEV., S/N 26 dB) STEREO 45 µV / 42.1 dBf (46 kHz DEV., S/N 46 dB) Total harmonic distortion (1 kHz) MONO 0.2% (71.2 dBf input) STEREO 0.8% (71.2 dBf input) Signal to noise ratio (DIN weighted) MONO 65 dB (40 kHz DEV. 71.2 dBf input) STEREO 60 dB (46 kHz DEV. 71.2 dBf input) Stereo separation (DIN 1 kHz 36 dB Selectivity (DIN ±300 kHz 64 dB Frequency response 30 Hz ~ 15 kHz), +0.5 dB, -3.0 dB AM tuner section Tuning frequency range 531 kHz ~ 1,602 kHz Usable sensitivity 16 µV / (600 µV/m) Signal to noise ratio (30% mod. 1 mV input 50 dB GENERAL Power consumption KRF-V5060D 280W KRF-V4060D 200W AC outlet SWITCHED total 90 W max.) Dimensions W : 440 mm H : 143 mm D : 303 mm Weight (Net 7.8 kg Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature). 36 EN For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model Serial Number