Kenwood XD-752 User Manual - Page 28
A tip for use of the tape counter, Relay play, Basic
View all Kenwood XD-752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Basic section 28 Relay play When tapes are set in the decks A and B and the reverse mode is set to " " (play of both sides), play of the second deck will be started automatically after play of the first deck has been completed. Tape play will be repeated alternately. ÷ Relay play is not possible in the reverse modes " " and " ". ÷ If a tape is loaded only in either deck, playback stops after having played both sides of the tape. A tip for use of the tape counter The tape counter is set to "0000" when a cassette tape is loaded. By writing down the counter reading in case you want to interrupt recording (playback) in the middle of the tape, the memo will be helpful as a reference for locating the same position when continuing the recording (playback) the next time. The tape counter figure decrements during recording or playback of the back side (while the 2 tape transport indicator is lit). To set the tape counter to "0000", open the cassette holder once. Then the counter will be reset. Let's put out some sound XD-SERIES (EN/M,T) A A TAPE 0000