KitchenAid KBHS179SSS Installation Guide - Page 5
Installation Instructions - shipping weight
UPC - 883049035123
View all KitchenAid KBHS179SSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INSTALLATION INSTRUCTIONS Prepare Built-In Microwave Oven 1. Locate existing wiring to avoid drilling into or severing wiring during installation. WARNING Excessive Weight Hazard Use two or more people to move and install microwave oven. Failure to do so can result in back or other injury. 2. To avoid floor damage, set the microwave oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting. 3. Remove the shipping materials and tape from the microwave oven. 4. Remove and set aside racks and other items from inside the microwave oven. 5. Remove the hardware package from inside the bag containing literature. 6. Move the microwave oven and cardboard close to the microwave oven's final location. Make Electrical Connection WARNING Electrical Shock Hazard Disconnect power before servicing. Use 12 gauge solid copper wire. Electrically ground oven. Failure to follow these instructions can result in death, fire, or electrical shock. This microwave oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire twisted together. 1. Disconnect power. 2. Feed the flexible cable conduit from the microwave oven through the opening in the cabinet. 3. Remove junction box cover if it is present. 4. Install a UL listed or CSA approved conduit connector to the junction box. A A. UL listed or CSA approved conduit connector 5. Route the flexible cable conduit from the microwave oven to the junction box through a UL listed or CSA approved conduit connector. 6. Tighten screws on conduit connector. 5