KitchenAid KBNU361VSS Use & Care Guide - Page 20
Conversion from LP Gas to Natural Gas
View all KitchenAid KBNU361VSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Conversion from LP Gas to Natural Gas Installation of the regulator 1. Turn off the main gas supply valve. 2. Unplug grill or disconnect power. 3. Disconnect 20 lb LP gas fuel tank (if present). 4. Turn off all burner control valves. 5. Remove rear cover and 2 screws. 9. Use pipe wrench to install the convertible regulator. Brass cap will be facing up when tight. A B A. Brass elbow B. Convertible regulator 10. To make sure the regulator is set for Natural gas, use adjustable wrench to remove brass cap on appliance regulator. 6. Use adjustable wrench to remove LP hose regulator from brass elbow. Use adjustable wrench to remove brass elbow from shutoff valve. A 11. Examine the stem on the brass cap. If the letters "NAT" are B not showing on the end of the plastic stem farthest away from the brass cap, remove stem from cap, turn it over and snap C stem back into the cap so the letters "NAT" are at the end of the stem farthest away from the brass cap. NAT D A. Manifold B. Brass elbow C. Rear of grill D. Gas pressure regulator/hose assembly 7. Apply pipe sealant to the threads of the brass connector. Use pipe thread sealant that is certified for use with LP gas. 8. Use adjustable wrench to install brass connector (supplied) to shutoff valve. NOTE: The arrow on the regulator must be pointing toward the brass connector. 12. Reinstall cap onto convertible regulator. Change the main grill burner valve orifices 1. Manually remove all of the grates, sear plate, and burners. 2. Remove the 2 screws that hold the burner in place. Remove gas burner from the grill. A A. Two screws 20