KitchenAid KDTE234GPS Installation Guide - Page 23
Complete Installation
View all KitchenAid KDTE234GPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Complete Installation Check that power supply wire or cord does not touch dishwasher motor or lower part of dishwasher tub. Option A, Install Access Panel - Plastic Panel Option B, Install Access Panel - Metal Panel Place the plastic access panel against the dishwasher leg. Check that grounding clip is attached to the lower panel. Position the lower panel behind the access panel. On some models there is insulation on the access panel that must fall behind the insulation on the lower panel. Check that the lower edge of the access panel touches the floor. Adjust if necessary. Hold the 2 panels together and place them against dishwasher leg. Using a Phillips screwdriver or ¹⁄₄" nut driver, reinstall the screws through the holes in the access panel, and the slots in the lower panel. Using a flat-blade screwdriver, turn the fasteners ¹⁄₄ turn clockwise to lock into place. The fasteners slot will be straight up and down when properly locked. Check that the lower edge of the lower panel contacts the floor. Adjust if necessary. 23