KitchenAid KDTE404DSP Installation Guide - Page 24
Complete Installation
View all KitchenAid KDTE404DSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Check that top of door does not contact screws, brackets or countertop. If it does, adjust leveling legs. Remove towel from dishwasher. Reinstall the lower dish rack. If needed, see website for animated representation of this step. Visit www.kitchenaid.com/anchoring under FAQ tab. Complete Installation Option A, Install Access Panel - Plastic Panel Open door and check that space between dishwasher cabinet opening and tub is equal on both sides. If spacing is not equal, loosen bracket screws secured and shift tub. Tighten bracket screws. Place the plastic access panel against the dishwasher leg. If securing with a side attachment, check that sides of door do not rub against the screw heads. If they do, dishwasher must be re-centered. When dishwasher is properly centered, replace plastic buttons. Check that the lower edge of the access panel touches the floor. Adjust if necessary. 24