KitchenAid KEK1522CA Use & Care Guide - Page 9

Care And Cleaning

Page 9 highlights

care and cleaning Cleaning the Water Kettle and base IMPORTANT: Before cleaning, always disconnect the Water Kettle from electrical outlet and make sure that the Water Kettle has cooled completely. English Descaling the Water Kettle Water White vinegar Calcium deposits may form on the interior metal parts of the Water Kettle. To get the best performance from your Water Kettle, clean periodically. The cleaning interval will depend on the hardness of the water you put into the Water Kettle. The use of a commercial descaler is recommended. Cleaning the filter Wash Water Kettle and base by hand with a damp cloth. Dry and polish with a soft cloth. Abrasives and scouring agents of any kind are not recommended. If a commercial descaler is not available: 1. Fill the Water Kettle with white vinegar to the MIN (0.25 L) mark. 2. Add water to the 0.75 L mark. 3. Boil and allow to stand overnight. 4. Empty the solution from the Water Kettle. 5. Fill the Water Kettle with water, bring to a boil and drain out the water. Repeat this step twice. The Water Kettle is now ready to use. NOTE: If calcium deposits remain on the filter, let it stand overnight in a solution of water and white vinegar. Rinse the filter thoroughly and replace in the Water Kettle. Remove filter from Water Kettle (see "Inserting and removing the filter"); then rinse under running water. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

English
9
CARE AND CLEANING
Cleaning the Water Kettle and base
IMPORTANT:
Before cleaning, always
disconnect the Water Kettle from electrical
outlet and make sure that the Water Kettle
has cooled completely.
Calcium deposits may form on the interior
metal parts of the Water Kettle. To get the
best performance from your Water Kettle,
clean periodically. The cleaning interval
will depend on the hardness of the water
you put into the Water Kettle. The use of
a commercial descaler is recommended.
White
vinegar
Water
Wash Water Kettle and base by hand with
a damp cloth. Dry and polish with a soft
cloth. Abrasives and scouring agents of any
kind are not recommended.
Descaling the Water Kettle
If a commercial descaler is not available:
1.
Fill the Water Kettle with white vinegar
to the MIN (0.25 L) mark.
2.
Add water to the 0.75 L mark.
3.
Boil and allow to stand overnight.
4.
Empty the solution from the
Water Kettle.
5.
Fill the Water Kettle with water, bring
to a boil and drain out the water. Repeat
this step twice. The Water Kettle is now
ready to use.
Cleaning the filter
NOTE:
If calcium deposits remain on the
filter, let it stand overnight in a solution
of water and white vinegar. Rinse the
filter thoroughly and replace in the
Water Kettle.
Remove filter from Water Kettle (see
“Inserting and removing the filter”);
then rinse under running water.