KitchenAid KFC0516ER Owners Manual - Page 7
Assembling And Running The Food Chopper
View all KitchenAid KFC0516ER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ENGLISH USING THE FOOD CHOPPER ASSEMBLING AND RUNNING THE FOOD CHOPPER IMPORTANT: Be sure the Food Chopper is unplugged before assembling. Start with the work bowl handle facing front on the 1 base. Rotate the handle 90° counterclockwise to lock into place. When assembled properly, the handle will face the right side. Fit drive adapter over the shaft in the center of the 2 work bowl, then rotate and lower the drive adapter until it rests at the bottom of the work bowl. If using the blade, fit the blade over the drive 3 adapter, then rotate and lower the blade until it rests at the bottom of the work bowl. If using the whisk, see "Using the whisking accessory" section. NOTE: Do not try to install more than one accessory at a time. The Food Chopper will operate with either the blade or the whisking accessory in place, not both. Place ingredients to be processed inside the work 4 bowl. For uniform consistency of processed foods, cut fruits, vegetables, and meats into 1-inch pieces. IMPORTANT: Do not process coffee beans or hard spices such as nutmeg as they may damage the Food Chopper. Place the lid on the work bowl with the lid handle 5 facing front. Rotate the lid handle counterclockwise until it locks into place. The lid will click when properly locked into place. NOTE: The work bowl and lid must be locked into place for the Food Chopper to operate. USING THE FOOD CHOPPER | 7