KitchenAid KOCE507EBS Installation Instructions - Page 2

BUILT-IN MICROWAVE/OVEN COMBINATION SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean: DANGER You can be killed or seriously injured if you don't immediately follow instructions. WARNING You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools Needed ■ Phillips screwdriver ■ Measuring tape ■ Drill (for wall cabinet installations) ■ 1" (2.5 cm) drill bit (for wall cabinet installations) ■ Level ■ Flat-blade screwdriver Parts Needed ■ UL listed or CSA approved conduit connector ■ UL listed wire connectors ■ Warming Drawer Deflector Kit (for ovens installed above a warming drawer) Order Part Number W10489566B for white 27" (68.6 cm) kit Order Part Number W10489564B for black 27" (68.6 cm) kit Order Part Number W10489568A for stainless steel 27" (68.6 cm) kit Order Part Number W10489567B for white 30" (76.2 cm) kit Order Part Number W10489565B for black 30" (76.2 cm) kit Order Part Number W10489569A for stainless steel 30" (76.2 cm) kit Order Part Number W10727416A for stainless steel/black 30" (76.2 cm) kit To order, see the "Assistance or Service" section of the Use and Care Guide. ■ Flush Installation Kit (for Combo installed at flush installation) Order Part Number W10752694A for white 27" (68.6 cm) kit Order Part Number W10752695A for black 27" (68.6 cm) kit Order Part Number W10752696A for stainless steel 27" (68.6 cm) kit Order Part Number W10752687A for white 30" (76.2 cm) kit Order Part Number W10752688A for black 30" (76.2 cm) kit Order Part Number W10752693A for stainless steel 30" (76.2 cm) kit Order Part Number W10752691A for black/stainless steel 30" (76.2 cm) kit To order, see the "Assistance or Service" section of the Use and Care Guide. Parts Supplied ■ #8-14 x 1" screws (4) ■ Bottom vent ■ #8-18 x ³⁄₈" screws - bottom vent (2) Check local codes. Check existing electrical supply. See "Electrical Requirements." It is recommended that all electrical connections be made by a licensed, qualified electrical installer. Built-In Microwave/Oven Combination Location Requirements IMPORTANT: Observe all governing codes and ordinances. ■ Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance with oven. ■ Recessed installation area must provide complete enclosure around the recessed portion of the oven. ■ Grounded electrical supply is required. See "Electrical Requirements" section. 2