KitchenAid KRFF577KPS Owners Manual - Page 11

4. Install the water supply tube clamp around the water supply line to reduce strain on the coupling. 5. Turn shutoff valve on. 6. Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak. 7. On some models, the ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install in the 1/4ʺ (6.35 mm) water line at either tube connection. Obtain a water strainer from your appliance dealer. Complete the Installation WARNING 1. Remove the air filter from its packaging. NOTE: An air filter status indicator is included with the air filter. The indicator is not needed for models that display the air filter status on the control panel. 2. Lift open the vented door. 3. Snap the filter into place. A. Air filter Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Plug into a grounded 3-prong outlet. NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill the ice storage bin. 2. Flush the water system. See "Water and Ice Dispensers." Install Air Filter (on some models) The air filter reduces the buildup of odors. This helps to maintain a cleaner environment inside your refrigerator. An air filter is 15 times more powerful than baking soda at reducing common food odors inside the refrigerator. Your refrigerator's accessory packet includes an air filter, which must be installed prior to use. On some models, the air filter is already installed at the factory. Style 2-Behind LED Vent Cover Install the air filter behind the blue LED-lighted vent cover, located on the rear wall near the middle of the refrigerator. 1. Remove the air filter from its packaging. 2. Firmly grasp plastic cover on the vented cover with both hands and pull out to remove. NOTE: When cover is removed for the first time, a small foam part the size of the filter will need to be discarded. 3. Snap the filter into place. A. Air filter Installing the Air Filter Depending on your model, the air filter can be installed in one of the following ways: Style 1-Behind Vented Door: Install the air filter behind the vented door, located on the rear wall near the top of the refrigerator compartment. Installing the Filter Status Indicator (on some models) The air filter icon on the control panel displays the air filter status. � Blue: Good. � Yellow: Order a replacement. � Red: Replace air filter. � Red and flashing "Replace Filter": Expired. After replacing the air filter, press and hold the Air Filter button for 3 seconds. The filter icons will turn off. See "Quick Start Guide." When the system is reset, the air filter icon will return to its blue color and the words "Replace Filter" will disappear from the control panel. 11