KitchenAid KSRG22FTST User Instructions - Page 8

CONDITION: SETTING ADJUSTMENT: REFRIGERATOR too cold REFRIGERATOR Control one setting lower REFRIGERATOR too warm REFRIGERATOR Control one setting higher FREEZER too cold FREEZER Control one setting lower FREEZER too warm/too little ice FREEZER Control one setting higher Accelerated Ice Production This feature assists with temporary periods of heavy ice usage by increasing ice production over a 24-hour period. ■ Press ICE touch pad to set the freezer temperature to -10°F (-23°C). The Accelerated Ice setting will remain on for 24 hours unless manually turned off. The display will continue to show your normal temperature set point. NOTE: If increased ice production is desired at all times, set the Freezer Control to a colder setting. Adjusting the freezer to a colder temperature may make some foods, such as ice cream, harder. Digital Controls (on some models) To turn the refrigerator on, press and hold POWER (ON/OFF) for 2 seconds.The factory recommended set points are 0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator. NOTES: ■ To view Celsius temperatures, press the °C SELECT pad. The indicator will light up. To return the display setting to Fahrenheit, press the °C SELECT pad again. ■ If the freezer temperature is below zero, the negative sign next to the freezer display will light up. Adjusting Digital Controls The set point range for the freezer is -5°F to 5°F (-21°C to -15°C). The set point range for the refrigerator is 33°F to 41°F (1°C to 5°C). ■ To adjust the set point temperatures, press the refrigerator or freezer PLUS (+) or MINUS (-) pad until the desired temperature is reached. CONDITION: REFRIGERATOR too cold REFRIGERATOR too warm FREEZER too cold FREEZER too warm/too little ice TEMPERATURE ADJUSTMENT: REFRIGERATOR Control 1° higher REFRIGERATOR Control 1° lower FREEZER Control 1° higher FREEZER Control 1° lower Max Cool The Max Cool feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures. ■ Press MAX COOL pad to turn on the Max Cool feature. The Max Cool indicator light will remain on for 24 hours unless manually turned off. NOTE: The temperature display will not change. After 24 hours, the refrigerator returns to the previous temperature set points. Accelerated Ice Production (on some models) This feature assists with temporary periods of heavy ice use by increasing ice production over a 24-hour period. ■ Press OPTIMICE® feature touch pad to turn on the OptimIce® feature. The OptimIce® setting will remain on for 24 hours unless manually turned off. ■ If increased ice production is desired at all times, set the Freezer Control to a colder number. Setting the freezer to a colder temperature may make some foods, such as ice cream, harder. Temperature System The Temperature System feature lets you know the compressor or evaporator fan is running. It is normal for this indicator light to be on. Convertible Drawer Temperature Control The control can be adjusted to properly chill meats or vegetables. The air inside the pan is cooled to avoid "spot" freezing and can be set to keep meats at the National Livestock and Meat Board recommended storage temperatures of 28° to 32°F (-2° to 0°C). The convertible vegetable/meat drawer control comes preset at the lowest meat setting. To store meat: Set the control to one of the three MEAT settings to store meat at its optimal storage temperature. To store vegetables: Set the control to VEG to store vegetables at their optimal storage temperatures. NOTE: If food starts to freeze, move the control to the left (less cold). Remember to wait 24 hours between adjustments. 8