KitchenAid KUBR314KSS Dimension Guide - Page 4

Wood Panel Guide CAUTION: Installation of door panels with less than a 3/8" (0.95 cm) gap between the door panel and the adjacent cabinet increases the risk of potential pinching. IMPORTANT: The graphics in following sections show a custom panel for a door with the hinges installed on the righthand side. If your beverage center has the hinges installed on the left-hand side, rotate the custom frame 180° so the hinge markings will be on the left. Solid door overlay panel Panel dimensions shown are the minimum size to cover the appliance door. Panels can be made taller/wider to match surrounding cabinetry. The recommended thickness of the overlay panel is 3/4" (19 mm). Custom solid door overlay panel must not weigh more than 20 lb (9.07 kg). Custom glass door overlay panel must not weigh more than 10 lb (4.54 kg). Overlay panels weighing more than recommended may cause damage to your appliance. Glass door overlay panel 1/8" (3 mm) 1/4" (7 mm) 415/16" (125 mm) 2" (53 mm) 1/2" (12 mm) 233/4" (60.3 cm) 1/8" (3 mm) 1/4" (7 mm) 415/16" (125 mm) 2" (53 mm) 1/2" (12 mm) 233/4" (60.3 cm) Solid door overlay panel and hinge routing dimensions. 305/8" (77.75 cm) Glass door overlay panel and hinge routing dimensions. 171/16" (43.3 cm) 2113/16" (55.4 cm) 305/8" (77.75 cm) W11530526 4 ®/™ ©2020 All rights reserved. Used under license in Canada. 12/2020