KitchenAid KUDS35FXWH Use & Care Guide - Page 16
Troubleshooting - 5 parts
View all KitchenAid KUDS35FXWH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Dishwasher Maintenance Procedure Cleaning the Dishwasher Clean the exterior of dishwasher with a soft, damp cloth and mild detergent. If your dishwasher has a stainless steel exterior, a stainless steel cleaner is recommended - Stainless Steel Cleaner and Polish Part Number 31462A. Removal of Hard Water / Filming: Recommended use of a monthly maintenance product such as affresh® Dishwasher Cleaner Part Number W10282479. ■ Load your dishwasher (preferably with dishes affected by filming / hard water). ■ Place tablet in main wash compartment of detergent dispenser. ■ Select cycle/option best for heavily soiled dishes and start dishwasher. NOTE: Recommended to use a premeasured detergent tablet or pack for regular daily use. Vacation or Extended Time Without Use To reduce the risk of property damage ■ If you will not be using the dishwasher during the summer months, turn off the water and power supply to the dishwasher. ■ Make sure the water supply lines are protected against freezing conditions. Ice formations in the supply lines can increase water pressure and damage your dishwasher or home. Damage from freezing is not covered by the warranty. ■ When storing your dishwasher in the winter, avoid water damage by having your dishwasher winterized by authorized service personnel. Troubleshooting First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call. In the U.S.A., www.kitchenaid.com In Canada, www.kitchenaid.ca PROBLEM DISHWASHER DOES NOT RUN DETERGENT REMAINS IN THE DISPENSER OR TABLET IS ON BOTTOM OF TUB CYCLE RUNS TOO LONG SOLUTION NOTE: It is normal for the dishwasher to repeatedly pause several times during a cycle. If the Start/Resume light is blinking, close the door and push START/RESUME. Be sure the door is closed and latched. Be sure you have disabled Sleep Mode by pressing either START/RESUME or CANCEL, or opening and closing the door before selecting your cycle/option. Check that there is not an interference with large casserole dishes and the wash system at the back of the dishwasher. Adjust loading as necessary to ensure door is closed and latched. Be sure you have selected a cycle. (See "Cycle and Option Descriptions" section.) Be sure there is power to the dishwasher. A circuit breaker or fuse may have tripped. If lights other than Start/Resume blink and the unit will not run, you will need to call for service. Check for dishware such as cookie sheets, cutting boards, or large containers, etc., that may be blocking the detergent dispenser from opening properly. Be sure your detergent is fresh and lump free. Be sure the cycle has completed (the Clean light is on). If it has not completed, you will need to resume the cycle by closing the door and pressing START/RESUME. NOTES: ■ To use less water and reduce energy consumption you will encounter cycles that typically run for up to 3 hours. ■ A water heater setting of 120°F (49°C) is best, the dishwasher will delay longer while heating cooler water. ■ Some options will add time to the cycle. (See "Cycle and Option Descriptions" section.) The ProDry™ or Heat Dry option adds approximately ¹⁄₂ hour. Try the 1 Hour Wash cycle. Run the hot water at a faucet close to the dishwasher before starting the cycle. ® affresh is a registered trademark of Whirlpool, U.S.A. 16