KitchenAid KUIC15PLXS Use & Care Guide - Page 7
Ice Maker Door - parts
UPC - 883049221663
View all KitchenAid KUIC15PLXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Ice Maker Door Tools needed: Gather the required tools and parts before starting installation. wrench wrench ■ Flat putty knife ■ Phillips screwdriver Reverse Hinges 1. Unscrew and remove the top hinge. Replace the screws in the empty hinge holes. 2. Remove the screws from the bottom of the opposite side of the ice maker cabinet. Turn the top hinge upside down so that the hinge pin points up. Place the hinge on the bottom opposite side of the ice maker and tighten screws. Hinge pin Hex head hinge screw 3. Remove the plastic hinge pin sleeve from the "old" bottom hinge and replace it on the new bottom hinge pin. Handle screw Remove Door End cap screw 4. Remove the "old" bottom hinge screws and hinge. Replace the screws in the empty hinge holes. 5. Remove the screws from the top of the opposite side of the ice maker cabinet. Turn the hinge upside down so that the hinge pin points down. Place the hinge on the top opposite side of the ice maker and tighten the screws. 6. Remove the top hinge pin. 1. Unplug ice maker or disconnect power. 2. Remove the handle screws and handle (on some models). Keep the parts together and set them aside. 3. Remove the hinge pin from the top hinge. 4. Remove the door from the hinges and screw the top hinge pin back into the top hinge. 5. Reverse the door end caps as follows: ■ Remove the screw and end cap from the top corner. Move it diagonally to the opposite side's bottom corner, keeping the straight side of the end cap facing the front of the ice maker. Replace Door 1. Place plastic hinge pin sleeve in the top hinge hole on the door. Align the door with the top hinge hole and replace the top hinge pin. 2. Replace the handle and handle screws. Top Hinge A ■ Remove the screw and end cap from the bottom corner. Move it diagonally to the opposite side's top corner, keeping the straight side of the end cap facing the front of B the ice maker. C A B C D D A. Hinge pin B. Hinge pin sleeve Bottom Hinge C. Hinge D. Hex head hinge screw D C B A A. Top corner open (no end cap) B. Beginning top corner end cap C. Beginning bottom corner end cap D. Bottom corner open (no end cap) 6. Set the door aside. A B C A. Hex head hinge screw B. Hinge pin sleeve D C. Hinge D. Hinge pin 7