KitchenAid KUIC18PNZS Dimension Guide - Page 2

Double Refrigerator Drawers, Refrigerator/Freezer Drawers and Double Freezer Drawers PRODUCT MODEL NUMBERS KDDC24 KDDO24 ELECTRICAL REQUIREMENTS 115-Volt, 60-Hz, AC-only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator drawers be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord. OPENING DIMENSIONS (Both Styles) s Height dimensions are shown with the leveling legs extended to the minimum height of 1/4" (6.35 mm) below the refrigerator drawers. NOTE: When leveling legs are fully extended to 1" (25 mm) below the refrigerator drawers, add 3/4" (19.05 mm) to the height dimensions. See "Product Dimensions." 14³⁄₄" (37.5 cm) A ¹⁄₂" (1.3 cm) 34³⁄₈" (87.3 cm) min. 35" (88.9 cm) max. 24" (60.96 cm) min. B 24" (60.96 cm) min. Critical Dimensions: A. 14³⁄₄" (37.5 cm) utility opening B. 24" (60.96 cm) minimum opening width TOP AND BOTTOM OVERLAY DRAWER PANEL DIMENSIONS s The thickness of the overlay panels must be ³⁄₄" (19.05 mm). s Each overlay panel must not weigh more than 10 lbs (4.5 kg). s Do not exceed the height dimension for the overlay panels. s The width of the overlay panels may vary according to the width of the cabinet opening. 2.4 cm) 4¹⁄₈" (10.5 cm 2.1 cm) 14⁷⁄₈" (37.8 cm) 2.1 cm) 2 5.6 cm) 23⁵⁄₈" (60.0 cm) Reverse Side Pilot Holes 1.6 mm) diameter x A ³⁄₈" (9.5 mm) deep 8 places A. Overlay hook locations B. Route ¹⁄₈" deep R 1.6 mm) (2.4 cm) min. 1³⁄₄" (4.4 cm) B Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only. For complete details, see Installation our products, we reserve the right to change materials and specifications without notice. Instructions packed with product. Specifications subject to change without notice. Page 2 of 2 Ref. W10310148A 3/18/10