Kodak 04694 Product Brief
Kodak 04694 - Max One Time Use Camera Manual
 |
UPC - 041778994849
View all Kodak 04694 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kodak 04694 manual content summary:
- Kodak 04694 | Product Brief - Page 1
CIS-169 April 1995 CURRENT INFORMATION SUMMARY Opening Instructions for the KODAK MAX Flash One-Time-Use Camera Wear eye protection when opening all cameras. 1 Wind off Shutter Button Thumbwheel 3 Remove Film • Check the frame counter window. • X's - Kodak 04694 | Product Brief - Page 2
and applicability of the information to a specific photographic use rests with the end user. CIS-169 Opening Instructions for the KODAK MAX Flash One-Time-Use Camera Consumer Imaging EASTMAN KODAK COMPANY • ROCHESTER, NY 14650 Kodak and Max are trademarks. Minor Revision 12-98 Printed in U.S.A.
-
1 -
2
 |
 |
CIS-169
April 1995
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK MAX Flash One-Time-Use Camera
Wear eye protection when opening all cameras.
Wind off
Open Film Door
Remove Film
©Eastman Kodak Company, 1996
1
2
3
4
Remove Battery
5
• Check the frame counter window.
• X’s must be visible.
• If not, grip camera, press shutter button, and
turn thumbwheel untill film is fully rewound.
• Insert special tool into end slot (as shown).
• Use tool to bend cover back and remove film.
• Place in recycle bin.
• Return to Kodak for recycling.
• Repeat the same steps at opposite end of
camera to remove battery.
Battery
Opened Camera with film and battery removed.
Exposed Film
Shutter Button
Thumbwheel
CAUTION: This camera body
contains a high voltage capacitor
and circuit board. To avoid electric
shock, do not pry apart the front and
back sections of camera. Remove
only film and battery from their
respective compartments. If sections
of the camera are separated, do not
touch the circuit board.
CAUTION: To avoid injury, use tool
carefully.