Kodak 04694 Product Brief - Page 1

CIS-169 April 1995 CURRENT INFORMATION SUMMARY Opening Instructions for the KODAK MAX Flash One-Time-Use Camera Wear eye protection when opening all cameras. 1 Wind off Shutter Button Thumbwheel 3 Remove Film • Check the frame counter window. • X's must be visible. • If not, grip camera, press shutter button, and turn thumbwheel untill film is fully rewound. 2 Open Film Door • Use tool to bend cover back and remove film. 4 Remove Battery Opened Camera with film and battery removed. • Insert special tool into end slot (as shown). CAUTION: This camera body contains a high voltage capacitor and circuit board. To avoid electric shock, do not pry apart the front and back sections of camera. Remove only film and battery from their respective compartments. If sections of the camera are separated, do not touch the circuit board. Battery Exposed Film • Repeat the same steps at opposite end of camera to remove battery. 5 • Place in recycle bin. • Return to Kodak for recycling. CAUTION: To avoid injury, use tool carefully. ©Eastman Kodak Company, 1996