Kodak 1802230 User Guide - Page 51
Replacement procedures, Replacing the feed module or feed module tires
UPC - 041771802233
View all Kodak 1802230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Replacement procedures Replacing the feed module or feed module tires This section provides procedures for replacing the following parts. Use the list below as a guideline for frequency of replacement. • Feed Module tires and Separation Roller tires - tire life will vary depending upon paper types, environment and cleanliness. Nominal tire life will be approximately 500,000 documents; results will vary. Degradation of feeder performance, multiple feeds, stoppages, etc. indicate a need to change tires. Change all the tires on the feed module and separation roller at the same time. • Feed Module and Separation Roller - it is recommended that you install a new feed module and separation roller approximately every 4th tire change. Install a new feed module and separation roller at the same time. • Pre-separation Pad - it is recommended that you change the preseparation pad approximately every 500,000 documents. • Imaging Guides - replace when the imaging guides are heavily scratched and defects show in the image. To replace the feed module or feed module tires: 1. Remove the output tray. 2. Lift up the printer access cover. 3. Open the pod. 5-12 A-61500 May 2010