Kodak 8370181 User Manual - Page 37
Security none, WEP, or WPA-PSK, Problem, Possible causes and/or solutions
View all Kodak 8370181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Troubleshooting and support Problem Possible causes and/or solutions (Continued from previous ■ Make sure the network profile settings on your frame match table) Frame cannot connect to the wireless network - those of the network. In an Infrastructure network, you can usually view the network settings with the software program included with the router or through the interface of a connected device. See the router or device documentation for "Wireless network not details. found" appears. If possible, note the following settings for the network, then change the profile settings on your frame to match them: - SSID - Wi-Fi mode (Infrastructure) - Security (none, WEP, or WPA-PSK) - Dynamic IP (yes or no) - Connect Mode (yes - ask before connecting, or no connect automatically) NOTE: Many wireless network routers employ the use of a WEP passphrase for generating a WEP security key code. If WEP security is enabled for the network, make sure the key code, not the passphrase, is entered in the security settings for the network profile on the camera. www.kodak.com/go/support 30