Kodak ATS Quick Reference Guide - Page 14

Extra Bright Lamp Module Safety Precautions According to a temperature increase in the slide gate which, therefore, needs more careful handling when using slides, mounts and lamps. With the higher light output of the Extra Bright Lamp Module the temperature in the slide gate rises. To enable a smooth operation following hints should be considered: √ Use only light respectively light gray slide mounts (e.g. Wess slide mounts). Slide mounts with only one dark side or black side have to be sorted in respectively, mounted with the side facing the lamp. Please pay special attention when sorting your slide mounts in rear projections: √ Do not use a lamp type EXW/15 h for the projector (higher temperature - lamp not available from Kodak). √ Consider the room temperature! It may not exceed 35 degrees C! If these hints are not considered, mounts may deform! Quick Reference -- The ultimate reference for Kodak EKTAGRAPHIC Slide Projectors 14 © by Kodak AG Stuttgart CMS edition 6/98 -QR-Ekta.pm65