Kodak DP2000 Quick Start Guide - Page 1

DP2000 Digital Projector Connecting the Projector Icons on the projector will aid you when connecting the projector to a computer or video player. Caution: Turn off the computer, monitor and projector whenever you connect the components. Connecting to a Computer Audio cable Data cable Connecting to a Video Player If your video player uses a round, four-prong S-video connector, you'll need an S-video cable in addition to the audio cable and audio adapter. Note: The S-video cable is sold separately. Connecting with Video Cable Connecting with S-video Cable Audio adaptor Video cable Audio adaptor S-video cable Audio cable Audio cable Starting the Projector 1. Remove the lens cap. 2. Plug the power cord into the side of the projector, then plug it into your electrical outlet. 3. Turn on the lamp by pressing the button on the keypad. 4. Turn on your video source - a video player or a computer. 5. Position the projector and adjust the zoom setting for the image size you want. • Adjust the zoom ring. • Focus by rotating focus ring. • Be sure the projector is at a 90-degree angle to the screen. • Adjust the height of the projector. Press and hold the elevator button. Raise the projector to the height you want, then release the button. Zoom ring Elevator button Elevator foot Focus ring P/N 3H7570 009-0469-00 Quick Start Guide