Kodak DX4530 User Manual - Page 54
Running a Continuous Slide Show Loop, Displaying Pictures and Videos on a Television - camera power cable
UPC - 041771252175
View all Kodak DX4530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 4 Running a Continuous Slide Show Loop When you turn on Loop, the slide show is continuously repeated. 1 On the Slide Show menu, press to highlight Loop, then press the OK button. 2 Press to highlight On, then press the OK button. When you start a slide show, it repeats until you cancel it by pressing the OK button or until battery power is exhausted. The Loop setting remains until you change it. Displaying Pictures and Videos on a Television You can display pictures and videos on a television, computer monitor, or any device equipped with a video input. (Image quality on a television screen may not be as good as on a computer monitor or when printed.) NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see page 52). Video out 1 Connect the audio/video cable (included) from the camera video-out port to the television video-in port (yellow) and audio-in port (white). Refer to your television user's guide for details. The camera screen turns off; the television screen acts as the camera display. 2 Review pictures and videos on the television screen. NOTE: The slide show stops if you connect or disconnect the cable while a slide show is running. 42