Kodak I250 User Guide - Page 31
Cleaning the imaging guides, to remove the imaging guides for cleaning.
View all Kodak I250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3. Wipe the upper and lower transport areas with a roller cleaning pad. Cleaning the imaging guides 4. Dry the transport area with a dry Staticide Wipe. 5. Push against the raised edge on the left side of the rear roller cover and pull the cover up and out to remove it. Rear roller cover 6. Remove any dust or debris under the rear roller cover. 7. Re-install the rear roller cover. 8. Go to the next section to clean the imaging guides. Clean the exposed (top side) surfaces of the imaging guides. You do not need to remove the imaging guides for cleaning. 1. Wipe the upper and lower imaging guides with a Staticide Wipe. 2. Dry the imaging guides with a dry Staticide Wipe. 3. Lower the scanner door and press it down firmly until it latches into place. 4. Go to the next section to clean the paper path. A-61167 April 2005 27