Kodak I610 User Guide - Page 13
Stop/Pause and Start/Resume buttons, Power switch, Exit deflector optional, Paper Present Sensor - scanner troubleshooting
UPC - 041771485610
View all Kodak I610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
7 Stop/Pause and Start/Resume buttons - Stop/Pause (white with red triangle) button: press once to temporarily pause scanning (the green button can then use used to resume scanning). Press twice to stop scanning (end of job). Start/Resume (green) button: to start scanning. 8 LEDs- illuminate or flash from top to bottom as follows: Illuminates when the power is turned on and the scanner is idle. This indicator will flash if the scanner is in "sleep" or lamp saver mode. illuminates when the scanner is enabled and/or scanning, and flashes when the scanner is powering up. flashes when a document has jammed in the transport or when a multi-feed has been detected. Illuminates when a usercorrectable error has been detected. Illuminates when you need to call Service. Refer to Chapter 6, Troubleshooting, for complete descriptions of the LED indicators. 9 Power switch - press the power switch on (I) or off (O) as required. 10 Exit deflector (optional) - aids in document stacking. 11 Paper Present Sensor - detects the presence of documents in the elevator tray. 12* Height Adjustment Wire - located underneath the output tray (not shown in photo), this wire can be pulled out to raise the front of the output tray. 2-4 A-61500 April 2009