Kodak Kodak Printer Dock plus User Guide - Page 51

Print button/light, Light status, Cause, Action/solution, To enable Print

Get Kodak Kodak Printer Dock plus - EasyShare Printer Dock PDF manuals and user guides
UPC - 417712678654
View all Kodak Kodak Printer Dock plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Troubleshooting Print button/light Light status Cause Action/solution Light glows steady The printer dock is ready for None required. green printing. Light blinks green The printer dock is printing. Light is off There are no pictures in the None required. camera or on the card. To enable Print: The camera is not docked or a 1 Take pictures. compatible Kodak card reader 2 Dock the camera, or is not connected. connect a compatible Kodak card reader (page 14). If using a card reader, make sure a memory card is inserted. The camera is not properly Reseat the camera on the seated on the connector. printer dock (page 9). The camera or card reader is transferring pictures to the computer, or has established an active connection to the computer. None required. When transfer is complete, press the blinking Transfer button, . A PictBridge compatible device is connected. None required. The Print button is disabled; print command is controlled from the PictBridge compatible device. To print from another source, unplug the PictBridge compatible device. www.kodak.com/go/support 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Troubleshooting
www.kodak.com/go/support
45
Print button/light
Light status
Cause
Action/solution
Light glows steady
green
The printer dock is ready for
printing.
None required.
Light blinks green
The printer dock is printing.
Light is off
There are no pictures in the
camera or on the card.
None required.
To enable Print:
1
Take pictures.
2
Dock the camera, or
connect a compatible
Kodak card reader
(
page 14
). If using a card
reader, make sure a
memory card is inserted.
The camera is not docked or a
compatible Kodak card reader
is not connected.
The camera is not properly
seated on the connector.
Reseat the camera on the
printer dock (
page 9
).
The camera or card reader is
transferring pictures to the
computer, or has established
an active connection to the
computer.
None required.
When transfer is complete,
press the blinking Transfer
button,
A PictBridge compatible
device is connected.
None required.
The Print button is disabled;
print command is controlled
from the PictBridge compatible
device. To print from another
source, unplug the PictBridge
compatible device.