Konica Minolta Cube Cube3 User Guide

Konica Minolta Cube Manual

Get Konica Minolta Cube PDF manuals and user guides View all Konica Minolta Cube manuals
Add to My Manuals
Save this manual to your list of manuals

Konica Minolta Cube manual content summary:

  • Konica Minolta Cube | Cube3 User Guide - Page 1
    Cube® 3rd Generation Personal 3D Printer User Guide Original Instructions
  • Konica Minolta Cube | Cube3 User Guide - Page 2
    3D Printer Features 4 Cube 3D Printer Properties 4 4 AT A GLANCE 5 5 SPECIFICATIONS AND REQUIREMENTS 6 Weight 6 Software 6 OpenGL Version 6 Windows Requirements 6 MAC OS X Requirements 6 Android 6 iOS 6 Wireless Options 6 USB Mass Storage Device 6 Electrical Requirements 6 Material
  • Konica Minolta Cube | Cube3 User Guide - Page 3
    Supports Printer Manually 54 Printing A Model Via Wireless Connection 62 Printing From A Desktop Application 62 Printing From A Mobile Application 65 Saving A Model to A Mass Storage Device 69 Desktop Application 69 10 OPERATION PROCEDURES 71 Applying Cube Glue 71 Replacing A Material
  • Konica Minolta Cube | Cube3 User Guide - Page 4
    81 Gap Verification 84 Manual Gap Adjustment 85 Print Pad Maintenance 86 Clean The Print Pad 86 Test Print 87 Cube Name 88 Updating the Cube Firmware 89 Updating Firmware Using Wi-F.i 89 Updating Firmware Using USB 92 Repacking the Printer 94 Contacting Support 96 12 CUBIFY SUSTAINABILITY
  • Konica Minolta Cube | Cube3 User Guide - Page 5
    information that is the property of 3D Systems, Inc. The 3D Systems logo, 3D Systems, Cube and Cubify are registered trademarks of 3D Systems, Inc. Use of the Cubify.com website constitutes acceptance of its Terms of Service and Privacy Policy. This user guide is based on firmware version: v1
  • Konica Minolta Cube | Cube3 User Guide - Page 6
    be instructed to ship the defective 3D Printer, or certain parts of the 3D Printer, to 3D Systems. Please retain your Cube or CubePro packaging so that it may be used if You need to ship the 3D Printer. You can learn more about 3D Systems' warranty, service, updates, and other support by visiting
  • Konica Minolta Cube | Cube3 User Guide - Page 7
    materials, or 3D prints other than 3D Systems' print materials and genuine 3D Systems' components may void the warranty. • Adult supervision is required; observe children closely and intervene as necessary to prevent potential safety problems all instructions prior to setting up the printer. SHOCK
  • Konica Minolta Cube | Cube3 User Guide - Page 8
    ; easy to peel off Cartridge: 1 cartridge prints 13-to-14 mid-size creations. Up to two (2) cartridge capacity.* Material Colors: Visit www.cubify.com for a listing of color choices. *The number of jets and cartridge capacity depends on the printer model and configuration. 3D Systems, Inc. 4
  • Konica Minolta Cube | Cube3 User Guide - Page 9
    AT A GLANCE B C F A G B C J D H H E KI A Print Jets B Print Jet Tubes C Material Cartridges D Print Pad E Print Platform F Touchscreen Display I K G On / Off Button H USB Inlet Port (Mass Storage Device) I Power Inlet J Refuse Bins K USB B Port (for future use) 3D Systems, Inc. 5
  • Konica Minolta Cube | Cube3 User Guide - Page 10
    amp. MATERIAL STORAGE All polymers degrade with time. The following conditions ensure the material remains high quality: • Do not unpack cartridges from the foil until the material is needed. • Store at room temperature: 16-29° C (60 - 85° F) • Non-condensing relative humidity: 5% - 25% 3D Systems
  • Konica Minolta Cube | Cube3 User Guide - Page 11
    DIMENSIONS 13.3"H x 13.3"W x 11" D / 33.5 x 33.8 x 28 cm Front View Side View 13.3" (33.5 cm) 13.3" (33.5 cm) 11" (28 cm) 3D Systems, Inc. 7
  • Konica Minolta Cube | Cube3 User Guide - Page 12
    Quick Start Guide cubify.com materials in case the printer would need to be transported. Shipping the printer without the original packing materials may damage the printer and void the manufacturer's warranty. 1. Pull the clips (A) and remove them from the top of the printer box. A 3D Systems
  • Konica Minolta Cube | Cube3 User Guide - Page 13
    the printer. NOTE: There must be a minimum of 4" (102 mm) space in front of and behind the printer. Front View 8" (203 mm) Top View 4" (102 mm) Back 8" (203 mm) 8" (203 mm) Hand Clearance Around the Printer 5. Remove the top insert. Front 4" (102 mm) Build Plate Travel Area 3D Systems, Inc
  • Konica Minolta Cube | Cube3 User Guide - Page 14
    with your printer. 9. Connect the power supply cable to the power inlet port (A) on the printer. NOTE: Ensure the connection is secure. The cable should lock in place. To remove the cable, pull back on the outer cable end and carefully pull it out from the printer. A B A 3D Systems, Inc. 10
  • Konica Minolta Cube | Cube3 User Guide - Page 15
    10. Connect the power cord to utility power and to the power supply. NOTE: Ensure the connection is secure. 11. Power on the printer by pressing the button next to the touchscreen display. 3D Systems, Inc. 11
  • Konica Minolta Cube | Cube3 User Guide - Page 16
    name your printer at any time. Navigate to the System 1 screen, select CUBE NAME and follow the instructions on the printer. Connecting to an ad hoc network is discussed further in the section titled Setting Up an Ad Hoc Network. NOTE: The printer will attempt to connect to your network. 3D Systems
  • Konica Minolta Cube | Cube3 User Guide - Page 17
    the printer can not connect to a network, you will be asked to select another network after a few seconds. NOTE: Connection to a network is confirmed by a checkmark to the left of the network name. If the network is secure, a lock icon will appear to the right of the network name. 3D Systems, Inc
  • Konica Minolta Cube | Cube3 User Guide - Page 18
    will appear on the printer's touchscreen display. Take note of the serial number. You will need it to activate your printer. 7. Select the checkmark to continue. NOTE: This illustration provides an example of a serial number. Do not use this number to activate your printer. 3D Systems, Inc. 14
  • Konica Minolta Cube | Cube3 User Guide - Page 19
    the checkmark to complete the registration and warranty activation process. NOTE: Once the printer has been activated, you may press and release the button next to the touchscreen display to return to the main menu. This will bypass the print pad calibration and test print. 3D Systems, Inc. 15
  • Konica Minolta Cube | Cube3 User Guide - Page 20
    you rotate the print jet, ensure the print jet tube is tucked under the top of the printer cover. A 14. Mount the cartridge on the left side of the printer and select the checkmark to continue. NOTE: It may become necessary to slightly rotate the cartridge to seat it properly. 3D Systems, Inc. 16
  • Konica Minolta Cube | Cube3 User Guide - Page 21
    of the printer) into the right print jet opening on top of the printer. 17. Rotate the print jet clockwise until the dots align. Select the checkmark to continue. NOTE: As you rotate the print jet, ensure the print jet tube is tucked under the top of the printer cover. A 3D Systems, Inc. 17
  • Konica Minolta Cube | Cube3 User Guide - Page 22
    print jet will begin to heat. Once the print jet has reached the proper temperature, the printer will prime melted material into the refuse bin. 19. The right cartridge has been installed. Select the checkmark to the print pad magnetically attaches to the adjustment knobs. 3D Systems, Inc. 18
  • Konica Minolta Cube | Cube3 User Guide - Page 23
    adjustment knob B can be accessed from the front of the printer. The lock screw for adjustment knob A can be accessed from behind the printer. NOTE: Follow the instructions on the touchscreen display. Once the adjustments have been made, select the checkmark to continue. 2 1 3D Systems, Inc. 19
  • Konica Minolta Cube | Cube3 User Guide - Page 24
    properly, magnets will secure the print pad to the adjustment knobs. NOTE: The printer will perform an automated gap measurement. 24. Select the checkmark to continue. NOTE: this value when performing the Manual Level procedure. Your number may differ from the illustration. 3D Systems, Inc. 20
  • Konica Minolta Cube | Cube3 User Guide - Page 25
    not successful, select MANUAL GAP ADJUSTMENT. Refer to the section titled Manual Gap Adjustment for more information. Once the Manual Gap Adjustment procedure has prior to printing. NOTE: The printer will begin to heat and then begin printing the welcome message test print. 3D Systems, Inc. 21
  • Konica Minolta Cube | Cube3 User Guide - Page 26
    27. Select the checkmark to go to the main menu. NOTE: You may also press and release the button next to the touchscreen display to return to the main menu. 3D Systems, Inc. 22
  • Konica Minolta Cube | Cube3 User Guide - Page 27
    device, install cartridges, and view the printer status. Navigation Navigation between screens is performed by pressing the right or left arrows. Materials CARTRIDGE STATUS CARTRIDGE STATUS allows you to view out of specification, the user can perform the Manual Gap procedure. 3D Systems, Inc. 23
  • Konica Minolta Cube | Cube3 User Guide - Page 28
    you to turn on or off the system LEDs. System 3 FIRMWARE Selecting FIRMWARE allows you to update the printer firmware either with a file downloaded to a USB mass storage device or by wireless connection. INFO By selecting INFO, the printer will display the printer status. 3D Systems, Inc. 24
  • Konica Minolta Cube | Cube3 User Guide - Page 29
    . NOTE: This procedure demonstrates replacing the left material cartridge. Follow the same concept to replace the right material cartridge if applicable. NOTE: The printer will begin to heat. Wait for the printer to heat and then follow the user prompts in the touchscreen menu. 3D Systems, Inc. 25
  • Konica Minolta Cube | Cube3 User Guide - Page 30
    the operating temperature, the printer will prime melted material into the refuse bin. 7. The left cartridge has been installed. Select the checkmark to complete the procedure. NOTE: Once the cartridge has been installed, allow the print jet to cool down before continuing. 3D Systems, Inc. 26
  • Konica Minolta Cube | Cube3 User Guide - Page 31
    software to the printer using a wireless connection. Wireless transfer of print files usually takes more time than USB mass storage device transfer. 3. Using the arrows, navigate to the file name of your creation. NOTE: The file name will appear at the top of the display. 3D Systems, Inc. 27
  • Konica Minolta Cube | Cube3 User Guide - Page 32
    to use up the remaining material, select the checkmark to continue printing. NOTE: If the file was built with color(s) that are not installed, the printer will assign a color from one of the installed cartridges that match the material type. Select the checkmark to continue. 3D Systems, Inc. 28
  • Konica Minolta Cube | Cube3 User Guide - Page 33
    base of your creation. NOTE: For best results, allow the glue to dry before printing. NOTE: The printer will load the print file. NOTE: The estimated time to completion is noted at the bottom of the again to confirm your decision. Otherwise, select RESUME to continue printing. 3D Systems, Inc. 29
  • Konica Minolta Cube | Cube3 User Guide - Page 34
    5. Once the printer has finished printing, select the checkmark to continue. NOTE: Once the print has completed, the print jets will begin to cool. Your Creation for information about removing your creation from the print pad, cleaning the print pad and cleaning the part. 3D Systems, Inc. 30
  • Konica Minolta Cube | Cube3 User Guide - Page 35
    material Supports Supports are used when printing creations that need a supporting structure to print properly. Cut away the support structure from your creation using wire cutters. Once the supports have been cut away, use fine-grade sandpaper (not included) to finish smoothing the part. 3D Systems
  • Konica Minolta Cube | Cube3 User Guide - Page 36
    CUBIFY SOFTWARE INSTALLATION Installing Cubify Software for Windows NOTE: Windows computers can only communicate with printers that are connected to the same wireless network. 1. Go to www.cubify.com and select Run. NOTE: The Cubify InstallShield Wizard will begin to install. 3D Systems, Inc. 32
  • Konica Minolta Cube | Cube3 User Guide - Page 37
    Next to continue. 7. Select Next to install the application in the listed location or select Change and browse to a different location. 8. Select Install to continue. 3D Systems, Inc. 33
  • Konica Minolta Cube | Cube3 User Guide - Page 38
    OS X computers can only communicate with printers that are connected to the same wireless network. 1. Go to www.cubify.com and log in with your username and password. 2. Go to www.cubify.com/en/cube/activate. Select MAC. 3. Double-click the Cube software .dmg installer file. 3D Systems, Inc. 34
  • Konica Minolta Cube | Cube3 User Guide - Page 39
    to the Applications page and double-clicking the Cubify icon. Installing Cubify for Android NOTE: Android devices can only communicate with printers that are connected to the same wireless network. 1. Open the Play Store from your Android browser. 2. Select the Search icon. 3D Systems, Inc. 35
  • Konica Minolta Cube | Cube3 User Guide - Page 40
    3. Enter Cubify in the search box. 4. Select the Cubify application and install it. 3D Systems, Inc. 36
  • Konica Minolta Cube | Cube3 User Guide - Page 41
    Installing Cubify for iOS NOTE: iOS devices can only communicate with printers that are connected to the same wireless network. 1. Locate the Cubify application from the App Store and select it. 2. Download the application to your iOS device. 3D Systems, Inc. 37
  • Konica Minolta Cube | Cube3 User Guide - Page 42
    also specify the colors and materials to be used for printing. Search for creations. G Cart Review items stored in your cart. Manage your account settings, H Account Information order cartridges, access the help menu and review the Terms of Service and Privacy Policy. 3D Systems, Inc. 38
  • Konica Minolta Cube | Cube3 User Guide - Page 43
    Cubify application. D App Settings Select your unit of measure to either inches or millimeters. E Help Application documentation F About View the software version number G Terms of Service Read the Terms of Service H Privacy Policy Read the Privacy Policy 3D Systems, Inc. 39
  • Konica Minolta Cube | Cube3 User Guide - Page 44
    visit www.cubify.com. NOTE: Items shown without a Cube icon are not printable on a Cube printer. NOTE: Some models can be purchased. To purchase a creation, select the option to add to the cart. When ready, you can finish the transaction and download the model to your Shelf. 3D Systems, Inc. 40
  • Konica Minolta Cube | Cube3 User Guide - Page 45
    sub-categories. This allows for quicker access to your favorite design types. A B A Category Dropdown Select a category from a dropdown list. B Featured List Select a category from a list. 3D Systems, Inc. 41
  • Konica Minolta Cube | Cube3 User Guide - Page 46
    Select the category dropdown list to narrow your search. Categories are divided into product types and collections. After selecting a category, you can select a collection or a type. 3D Systems, Inc. 42
  • Konica Minolta Cube | Cube3 User Guide - Page 47
    add it to your shelf. Some models have multiple views. Select the navigation buttons (A)* to see other views. A *Not an available feature for mobile applications. 3D Systems, Inc. 43
  • Konica Minolta Cube | Cube3 User Guide - Page 48
    Sort the items in My Shelf by Name or Date. You may also filter your items by file type. 3D files include .STL files. Print files are .cube3 files optimized and ready to print. Refresh your application to ensure .cube3 file. *Not an available feature for mobile applications. 3D Systems, Inc. 44
  • Konica Minolta Cube | Cube3 User Guide - Page 49
    Select Print Now to prepare the item for printing. The checkmark indicates that the item has been selected. *Not an available feature for mobile applications. 3D Systems, Inc. 45
  • Konica Minolta Cube | Cube3 User Guide - Page 50
    of a non-networked printer Change the left cartridge color and N Right Cartridge material type of a non-networked printer O Print Pad A representation of the printer's print pad P Print Transfer the print file to the printer using the wireless connection to your network. 3D Systems, Inc. 46
  • Konica Minolta Cube | Cube3 User Guide - Page 51
    to change your print settings or view Cube Information. A B C A Print Settings Choose between Custom, Standard, Premium and Draft build settings. B Cube Info Update your printer firmware and review the printer system information. C About View the software version number. 3D Systems, Inc. 47
  • Konica Minolta Cube | Cube3 User Guide - Page 52
    Short print times and low material use Stronger prints High material use and almost solid prints Supports are structures that are automatically printed under overhanging parts of your model. • Rafts are printed during the first few layers to help the model adhere to the print pad. 3D Systems
  • Konica Minolta Cube | Cube3 User Guide - Page 53
    . You can personalize the settings by selecting a category and then selecting one of the presented options. Layers: • • Density: • • • Fill Pattern: • • • Supports: • • Rafts: • • 0.070 mm 0.200 mm Hollow Strong Almost Solid Honeycomb Diamonds Lines On Off On Off 3D Systems, Inc. 49
  • Konica Minolta Cube | Cube3 User Guide - Page 54
    Print Settings - Standard Select Standard for strong prints that do not require fine detail. Layers: 0.200 mm Density: Strong Fill Pattern: Diamonds Supports: Off Rafts: Off 3D Systems, Inc. 50
  • Konica Minolta Cube | Cube3 User Guide - Page 55
    Print Settings - Premium Select Premium for prints that require strength and fine detail. Layers: 0.070 mm Density: Strong Fill Pattern: Diamonds Supports: Off Rafts: Off 3D Systems, Inc. 51
  • Konica Minolta Cube | Cube3 User Guide - Page 56
    Print Settings - Draft Select Draft for prints that do not require strength or fine detail. Layers: 0.200 mm Density: Hollow Fill Pattern: Lines Supports: Off Rafts: Off 3D Systems, Inc. 52
  • Konica Minolta Cube | Cube3 User Guide - Page 57
    Cube Info A B C A Update Firmware If new firmware is available for your connected printer, select Update. B Refresh Find other printers on your network C Enter IP Find a printer manually by entering an IP address 3D Systems, Inc. 53
  • Konica Minolta Cube | Cube3 User Guide - Page 58
    for your printer and select Add. The Printer Name (D) should appear. NOTE: To find the IP address of your printer, navigate to the Network screen in the touchscreen display and select WIFI. If the printer is connected to your network, the IP address will appear on the display. 3D Systems, Inc. 54
  • Konica Minolta Cube | Cube3 User Guide - Page 59
    want to color. For models with multiple parts, press, hold and drag the color wheel to the part of the model you want to color. 3D Systems, Inc. 55
  • Konica Minolta Cube | Cube3 User Guide - Page 60
    Y-axis, and selecting Move. When finished, close the Move toolbar and select the Move button to deselect it. *Not an available feature for mobile applications. 3D Systems, Inc. 56
  • Konica Minolta Cube | Cube3 User Guide - Page 61
    will have no effect. When finished, close the Scale tool and select the Scale button to deselect it. *Not an available feature for mobile applications. 3D Systems, Inc. 57
  • Konica Minolta Cube | Cube3 User Guide - Page 62
    to the specified amount. When finished, close the Rotate tool and select the Rotate button to deselect it. *Not an available feature for mobile applications. 3D Systems, Inc. 58
  • Konica Minolta Cube | Cube3 User Guide - Page 63
    Remove Model Tool To remove the model from the print pad, select the Remove Model* button. Select Yes to confirm your decision. You can find the model again by selecting My Shelf. *Not an available feature for mobile applications. 3D Systems, Inc. 59
  • Konica Minolta Cube | Cube3 User Guide - Page 64
    Center Model Tool Select the model and then select the Center Model* button to center the model on the print pad. *Not an available feature for mobile applications. 3D Systems, Inc. 60
  • Konica Minolta Cube | Cube3 User Guide - Page 65
    Change Views Select Change Views and then select the viewing angle. 3D Systems, Inc. 61
  • Konica Minolta Cube | Cube3 User Guide - Page 66
    A Desktop Application NOTE: To print a file, ensure the software application and the printer are connected through a wireless network. NOTE: Transferring the print file over a wireless network and position the model and select Print. NOTE: Cubify will generate a print file. 3D Systems, Inc. 62
  • Konica Minolta Cube | Cube3 User Guide - Page 67
    pad and select OK. 5. Select PRINT on the printer's touchscreen display. 6. Select the checkmark to continue. NOTE: For best results, allow the glue to dry before printing. NOTE: To ensure proper adhesion, the glue area should be larger than the base of your printed creation. 3D Systems, Inc. 63
  • Konica Minolta Cube | Cube3 User Guide - Page 68
    NOTE: The print jets will heat to operating temperature. NOTE: The printer will begin to print. 7. When the printer has finished printing, select the checkmark to continue. NOTE: Follow the steps in the section titled Finishing Your Creation. 3D Systems, Inc. 64
  • Konica Minolta Cube | Cube3 User Guide - Page 69
    the layout may have some differences. NOTE: To print a file, ensure the mobile device and the printer are connected on the same wireless network. NOTE: Transferring a print file over a wireless network may take gestures: Zoom Out: Zoom In: Rotate the Print Pad: Move Model: 3D Systems, Inc. 65
  • Konica Minolta Cube | Cube3 User Guide - Page 70
    1. Select an item from My Shelf. 2. Select Print Now. 3D Systems, Inc. 66
  • Konica Minolta Cube | Cube3 User Guide - Page 71
    3. Press, hold and drag a color wheel to the model to change the color. 4. Select Print. NOTE: The printer will generate a .cube3 file and then transfer it to the printer over the wireless network. 5. Select PRINT on the printer's touchscreen display. 3D Systems, Inc. 67
  • Konica Minolta Cube | Cube3 User Guide - Page 72
    your printed creation. NOTE: The print jets will heat to operating temperature. NOTE: The printer will begin to print. 7. When the printer has finished printing, select the checkmark to go to the main menu. NOTE: Follow the steps in the section titled Finishing Your Creation. 3D Systems, Inc. 68
  • Konica Minolta Cube | Cube3 User Guide - Page 73
    the print files by inserting the device into the USB port on the printer. Pan/Zoom: Move the Stage: Rotate the Stage: Rotate the mouse For a list of available colors and material types, please visit www.cubify.com. 4. Color, scale and position the model on the print pad. 3D Systems, Inc. 69
  • Konica Minolta Cube | Cube3 User Guide - Page 74
    File. NOTE: Selecting Save to Shelf will save the print file to My Shelf. The original 3D file will remain there as well. NOTE: Cubify will generate a print file. 6. Once the section titled Printing Your Creation for information about printing from a USB mass storage device. 3D Systems, Inc. 70
  • Konica Minolta Cube | Cube3 User Guide - Page 75
    illustration below: Layer 2 Apply a second thin layer of glue to the print pad following the illustration below: NOTE: Ensure the glue is dry before printing. 3D Systems, Inc. 71
  • Konica Minolta Cube | Cube3 User Guide - Page 76
    and void the manufacturer's warranty. 1. Select SETUP. 2. Select CHANGE CARTRIDGE. 3. Select the material cartridge to change. NOTE: This procedure illustrates changing the right cartridge. The same concept applies to the left side. NOTE: The print jet will begin to heat. 3D Systems, Inc. 72
  • Konica Minolta Cube | Cube3 User Guide - Page 77
    As the print jet is rotating, ensure the print jet tube is tucked under the top of the printer cover. A 8. Mount the new cartridge to the right side of the printer. Select the checkmark to continue. NOTE: Ensure the print jet tube is tucked under the top of the printer cover. 3D Systems, Inc. 73
  • Konica Minolta Cube | Cube3 User Guide - Page 78
    jet will begin to heat. Once the print jet has reached the proper temperature, the printer will prime melted material into the refuse bin. 9. Select the checkmark to complete the procedure. SETTING UP A 1. Select SETUP. 2. Navigate to the Network screen and select WIFI. 3D Systems, Inc. 74
  • Konica Minolta Cube | Cube3 User Guide - Page 79
    3. Select WIFI NOTE: The printer will search for area networks. 4. Using the up or down arrows, browse to your network name and characters that make up your password and select them. Select the checkmark to continue. NOTE: The printer will attempt to connect to the network. 3D Systems, Inc. 75
  • Konica Minolta Cube | Cube3 User Guide - Page 80
    computer or device and the printer. It does not connect printer must have an ad hoc adapter installed. An ad hoc network is deleted when the user has disconnected from it or is out of range of other devices on the network unless it has been made a permanent network. 1. Select SETUP. 3D Systems
  • Konica Minolta Cube | Cube3 User Guide - Page 81
    a new connection or network. 10. Select Set up a wireless ad hoc (computer-to-computer) network. 11. Select Next. 12. Follow the steps in the wizard. 3D Systems, Inc. 77
  • Konica Minolta Cube | Cube3 User Guide - Page 82
    pieces of plastic waste material. Print material can also collect around the belt area on the left side of the printer. This area should be checked periodically and any print material found should be removed purge bin assemblies are installed properly before using the printer. 3D Systems, Inc. 78
  • Konica Minolta Cube | Cube3 User Guide - Page 83
    useful life, the printer will prompt you to replace it. Select the checkmark to continue. NOTE: If you have replaced the jet wiper, select the checkmark to reset the printer count. Press SKIP to be reminded later. Procedure 1. Remove the purge bin assemblies from the printer. 3D Systems, Inc. 79
  • Konica Minolta Cube | Cube3 User Guide - Page 84
    (A) upward. A 3. Install the new jet wiper onto the purge bin and reinstall the purge bin assembly into the printer. NOTE: Ensure the jet wiper is fully seated before reinstalling the purge bin assembly. 4. Select the checkmark to confirm the replacement of the jet wiper. 3D Systems, Inc. 80
  • Konica Minolta Cube | Cube3 User Guide - Page 85
    calibration is performed at the factory but should be performed routinely to ensure quality printing. The printer may occasionally prompt you to perform the Auto Level and Auto Gap procedures. If your creations 8). If the print pad is out of range, continue with the procedure. 3D Systems, Inc. 81
  • Konica Minolta Cube | Cube3 User Guide - Page 86
    can be accessed from the front of the printer. The lock screw for adjustment knob A can be 2 accessed from behind the printer. 1 6. Follow the instructions on the touchscreen display. Once the adjustments can damage the adjustment knob and void the manufacturer's warranty. 3D Systems, Inc. 82
  • Konica Minolta Cube | Cube3 User Guide - Page 87
    successful, the printer will being checking the Z-gap. NOTE: The printer will perform an MANUAL GAP ADJUSTMENT. Refer to the section titled Manual Gap Adjustment for more information. Once the Manual Gap Adjustment procedure has been performed, note the final reading for future reference. 3D Systems
  • Konica Minolta Cube | Cube3 User Guide - Page 88
    Gap Verification Print a test print from the System 1 menu. Once you have removed it from the print pad, visually inspect the first (bottom) layer of the print and verify has been removed and then reinspect it. Caution: Damage to the print pad can occur if the gap is too narrow. 3D Systems, Inc. 84
  • Konica Minolta Cube | Cube3 User Guide - Page 89
    print material. This can usually be accomplished by pulling out the print material with your fingers. Caution: Ensure the print jet nozzles are at room temperature before attempting to clean them. 1. Select MANUAL GAP the print pad and the left print jet, the gap is correct. 3D Systems, Inc. 85
  • Konica Minolta Cube | Cube3 User Guide - Page 90
    Print Pad for specific instructions. NOTE: Ensure the print pad is clean and dry before installing it in the printer. 3. Select the checkmark The Print Pad 1. Remove the print pad from the printer. 2. Wash all glue and print material from the print pad with warm tap water. If 3D Systems, Inc. 86
  • Konica Minolta Cube | Cube3 User Guide - Page 91
    the printer will assign an installed cartridge color to the test print. 3. Apply two thin layers of Cube Glue to the print pad. Select the checkmark to continue. NOTE: Apply enough glue to cover a square area of 5" (15 cm). NOTE: For best results, allow the glue to dry before printing. 3D Systems
  • Konica Minolta Cube | Cube3 User Guide - Page 92
    for your printer. Scroll through the letters by pressing the arrow symbols on each side of the screen. Select the letters to spell the name. Select the checkmark to confirm your choice. NOTE: Selecting the abc button toggles between lowercase letters, uppercase letters and numerals. 3D Systems, Inc
  • Konica Minolta Cube | Cube3 User Guide - Page 93
    is performed, you must perform the Auto Level procedure and then the Auto Gap procedure. Updating Firmware Using Wi-Fi 1. Select SETUP. 2. Navigate to the System 3 screen and select FIRMWARE. 3. Select WIFI. NOTE: The printer will attempt to connect to the server. 3D Systems, Inc. 89
  • Konica Minolta Cube | Cube3 User Guide - Page 94
    OR DISCONNECT THE PRINTER FROM UTILITY POWER DURING THE UPDATE PROCESS. NOTE: If no new firmware is available, select the checkmark to continue. NOTE: If the firmware download fails, select RETRY to start the download again. Select CANCEL if you do not want to update the firmware. 3D Systems, Inc
  • Konica Minolta Cube | Cube3 User Guide - Page 95
    NOTE: The installation could take a few minutes. WARNING: DO NOT POWER OFF OR DISCONNECT THE PRINTER FROM UTILITY POWER DURING THE UPDATE PROCESS. NOTE: If the firmware update fails. Select RETRY to For more information, refer to the section titled Print Pad Calibration. 3D Systems, Inc. 91
  • Konica Minolta Cube | Cube3 User Guide - Page 96
    www.cubify.com account and download the latest firmware for your USB mass storage device. 1. Select SETUP. 2. Navigate to the System 3 screen and select FIRMWARE. 3. Select USB KEY. 4. Insert the USB mass storage device into the printer and select the checkmark to continue. 3D Systems, Inc. 92
  • Konica Minolta Cube | Cube3 User Guide - Page 97
    The transfer could take a few minutes. WARNING: DO NOT POWER OFF OR DISCONNECT THE PRINTER FROM UTILITY POWER DURING THE UPDATE PROCESS. NOTE: If no new firmware is available, select : DO NOT POWER OFF OR DISCONNECT THE PRINTER FROM UTILITY POWER DURING THE UPDATE PROCESS. 3D Systems, Inc. 93
  • Konica Minolta Cube | Cube3 User Guide - Page 98
    To remove the cable, pull the outer sleeve back to release it and then continue to pull the cable from the printer. A 4. Securely repack all of the accessories into the accessories box. NOTE: Refer to the contents list in the section titled Unpacking and Setting Up Your Cube. 3D Systems, Inc. 94
  • Konica Minolta Cube | Cube3 User Guide - Page 99
    jet mount to the center of the printer and place the top insert over the mount. NOTE: The top insert is designed to keep the sides of the lower insert pressed outward. 9. Place the printer in the protective bag and then place it in the lower foam support in the box. 3D Systems, Inc. 95
  • Konica Minolta Cube | Cube3 User Guide - Page 100
    Place the upper foam support on top of the printer. 11. Close the box and install the clips in the cutouts on top of the box. 12. Place the printer box into the outer box and seal the outer box. CONTACTING SUPPORT Support for the Cube is available at [email protected]. 3D Systems, Inc. 96
  • Konica Minolta Cube | Cube3 User Guide - Page 101
    12 CUBIFY SUSTAINABILITY PROGRAM By its very nature 3D printing is a sustainable technology empowering 3D Systems' printers to produce affordable products one layer at a time using only the necessary amount of material required for each part with near zero waste in an energy efficient process.
  • Konica Minolta Cube | Cube3 User Guide - Page 102
    3D Systems, Inc. 333 Three D Systems Circle | Rock Hill, SC 29730 | USA www.Cubify.com | www.3dsystems.com ©2014 3D Systems, Inc. All rights reserved. PN: 390184-00 Rev. D | FW: v1.08
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Cube®
Personal 3D Printer
User Guide
Original Instructions
3
rd
Generation