Konica Minolta Cube Cube3 User Guide - Page 93
UPDATING THE CUBE FIRMWARE, Updating Firmware Using Wi-Fi
View all Konica Minolta Cube manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
UPDATING THE CUBE FIRMWARE The printer firmware can either be updated via wireless connection or by using a USB mass storage device. NOTE: Whenever a firmware update is performed, you must perform the Auto Level procedure and then the Auto Gap procedure. Updating Firmware Using Wi-Fi 1. Select SETUP. 2. Navigate to the System 3 screen and select FIRMWARE. 3. Select WIFI. NOTE: The printer will attempt to connect to the server. 3D Systems, Inc. 89
89
3D Systems, Inc
.
UPDATING THE CUBE FIRMWARE
The printer firmware can either be updated via wireless connection or by using a USB mass storage device.
NOTE: Whenever a firmware update is performed, you must perform the Auto Level procedure and then the Auto
Gap procedure°
Updating Firmware Using Wi-Fi
1°
Select
SETUP
°
2°
Navigate to the
System 3
screen and select
FIRMWARE
°
3°
Select
WIFI
°
NOTE: The printer will attempt to connect to the server°