Konica Minolta DR1600 DR1600/DAR2800 Operator Manual

Konica Minolta DR1600 Manual

Get Konica Minolta DR1600 PDF manuals and user guides View all Konica Minolta DR1600 manuals
Add to My Manuals
Save this manual to your list of manuals

Konica Minolta DR1600 manual content summary:

  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 1
    Operator's Manual Al& MINOLTA
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 2
    WARNING This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instructions Manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 3
    CONTENTS Specifications (DR1600) 1 (DAR2800) 2 Microfilming 19 Recording Document Mark 23 Recording Frame Number 27 Manual Exposure Mode 29 Choice Modes 30 Using the Imprinter (DAR2800) 34 Removing Documents Misfed (DAR2800) 38 Maintenance and Services 40 Troubleshooting
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 4
    SPECIFICAMNS DR1600 • Type: : Planetary Microfilmer • Lens: : Micro-Rokkor f= 28 mm • Film: : 16-mm Roll x 12.6 mm Double - 18.2 x 12.6 mm Automatically selected according to the original size detected, or manually selected. • Pulldown: : Single - 10.0 mm (9.5 to 11.75 mm) Double - 18.5 mm (
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 5
    Planetary Microfilmer with Automatic Document Feeder and Turnover Unit : Micro-Rokkor f= 28 mm : 16-mm Roll Film (Non-Perforated) 5 mil -100 ft., 2.5 mil- 215 ft. : 1. Automatic Document Feed Mode (ADF) 2. Single Document Feed Mode (SADF) 3. Manual Document Feed Mode 4. Book Mode - Same as in DR1600
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 6
    INSTALLATION ■ INSTALLATION ® Space Requirements To ensure easy operation and service the machine requires the following installation space. DR1600 0 1250 mm or 49-7/32" (1/32) 150 mm or 5-29/32" DAR2800 900 mm or 35-7/16" Without Work Table 150 mm or 5-29/32"
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 7
    . • Which is in the direct air stream of an air conditioner or ventilator. • Which is subject to vibrations. • Which is dusty. • Which is tilted place DR1600 ••• 1° DAR2800 ••• No more than 5° off horizontal from rear to front. NO GOOD CD / CD NO GOOD OK CD 4
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 8
    PARTS IDENTIFICATION ■ PARTS IDENTIFICATION ■ DR1600 LIM 10 12 14 f 15 BLOCK BATCH SPACE, STOP 5 3 8 17 IT 7 mark in dual-level recording or a medium document mark in tri-level recording. Press this Key to allow for generating a large document mark in trHevel recording. Incremented by one
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 9
    Document Pressure Glass Handle: 1241 Imprinter Unit [Option]: [251 Document Guide Plate: Ej Shutter Button: [Z_I? Stop Key: a Document Feed Key: 1291 Mode Change Key: Serves as a port into which documents are fed in one by one manually. Holds the document stack for automatic document feed in the
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 10
    memory the last frame number used with a particular Film Unit. Each DR1600 or DAR2800 machine can control up to four different Film Units. Switch ON ON OFF - NOTE If the Memory Switch positions are changed during microfilming or with the Film Unit removed, the machine memory is unable to keep
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 11
    KEYS AND INDICATORS DR1600/DAR2800 CONTROL PANEL KEYS AND INDICATORS DR1600/DAR2800 0 DR1600 14 13 11 u DAR2800 14 10 12 9 8 76 5 15 16 0 0 \0 00 AUTO MANUAL Duker T ,,91114( LEADEB/TRAILDI U.0 0 EXPOSURE TIME - a a El. B to select the document-mark recording level, either 0, 1, 2,
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 12
    the frame number, the Mode Choice setting number, the exposure time in the Manual Exposure Mode, and the number of frames to be skipped between images (variable stopped due to misfeed while they were being fed through the microfilmer, these Indicators light up green and/or red indicating locations of
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 13
    Unit with your both hands, its Film Movement Indicator facing toward you. 71 cao 2 Fit the Film Unit to the Film Unit Mounting Board of DR1600/DAR2800 so that the tab on the Mounting Board fits into the opening at the back of the Film Unit. - NOTE Make sure that the
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 14
    . Select document mark level - 0, 1, 2, or 3. Select frame number mode - OFF, 12 digits (A, B, C), 8 digits, 4 digits or OFF. [DR1600] Place document on Copy Board. [DAR2800] Select FEED MODE - Manual, SADF, or ADF Feed Mode. Select DOCUMENT MODE - 1-sided or 2-sided. Select Imprinter or not (option
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 15
    LOADING AND UNLOADING FILM A LOADING AND .UNLOADING FILM NOTE It is recommended to use a dark room when load or unload film to prevent fogging effect. 1. Loading Film 1 Place the Film Unit on its side as illustrated. Turn the Film Door Lock in the direction of arrow (counterclockwise) to open
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 16
    to the Film Unit Mounting Board and turn ON the DR1600/DAR2800 with the Power ON/OFF Switch. Advance the film properly, rethread it by following the instructions. 2. Unloading Film The Film Empty available for exposure reaches a given point during microfilming. (approx 1.5 meters or 5 feet). When
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 17
    2 Turn the Film Door Lock in the direction of arrow and open the Take-Up Door. 00 0 CCir 0 o 0° 3 With your fingertips, hold the film down in the Take-Up Spool to prevent it from unraveling. While so doing, cut off the film. 4 Remove the Take-Up Spool from the Take-Up Spindle and place it into a
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 18
    Film Empty Indicator has lit; however, be sure to allow at least 800 mm or 31-1/2" for the trailer. • In the ADF Mode of DAR2800; microfilming is terminated automatically as soon as a film-empty condition is encountered. 2 Turn the Film Door Lock in the direction of arrow and open the Take
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 19
    (See Page 9) O by using key, prefixed number (between 5 and 250) of frames will be advanced. (See Page 9) DR1600 I 0 1 EXPOSURE 0 AUTO Darker - EXPOSURE TIME MANUAL o RRRB Lighter la i I KOCK RRRI3 I i HATCH R.RaPt , I REM LEADER /TRAILER 0 0.3 0 0©o in in n in in po c,- mam tE
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 20
    against the " 0 mark on the Board. • In DAR2800, place a document or a neat stack of documents face up on the Manual Feed Tray or Document Feed Tray in the same direction as in DR1600. O Document Size (Copy Board) 8-1/2" or _ 210 mm Single 1/25 297 mm or 11" 17" or 420mm Double 1/25 T 297
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 21
    Y Set a slower exposure time. 50 ms.- -.2,000 ms -, Auto Slide the Auto Exposure Control Knob to the left. Darker Lighter I I I I I U Manual Set a faster exposure time. 50 ms.- -.2,000 ms ..- * The step test can also be taken by pressing the Shutter Button for each frame exposure
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 22
    o the Board, then press the Shutter Button. " mark on O MINOLTA - NOTE Up to 20-mm(25/32")-thick document microfilmed in focus. ® Microfilming on DAR2800 The DAR2800 microfilmer offers four different feed modes for microfilming: Manual, Single, and Automatic Document Feed Mode and Book Mode. Here
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 23
    that the heading or top edge of each document is positioned in the rear and the bottom edges are held tight up against the Document Guide at the front of the Tray. The Document Feed Tray accepts up to about 500 documents. MODE CHANGE BLOCK C=3 BATCH C=1 SPACE FEED I I - Press the Shutter
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 24
    on the Document Feed Tray. STOP A continuous filming operation can be interrupted by pressing the Stop Key. - NOTE When a film-empty condition is encountered during microfilming, beeps sound and the filming operation is automatically terminated. Press the STOPIkey to stop the hemp. 21
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 25
    you have a document or documents that cannot be fed in the Manual, Single, or Automatic Document Feed Mode. Example: A bind document or book (thickness: up to 10 mm or 13/32") The filming procedure is the same as that for DR1600. - Place the document face up on the Document Pressure Glass, making
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 26
    DOCUMENT MARK A document mark can be generated on each image or frame of a roll of microfilm for indexing purposes. It is recorded on the A-ch side (bottom side) of a roll by the following procedure. 1 Press the Document Mark Level Select Key as many times as it is
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 27
    currently selected. Here is the detailed procedure for generating document marks in each feed mode. 1. Manual Document Feed Mode Document Document u Single-Level Recording A document mark is placed as the document is manually fed in and filmed. MINOLTA MINOLTA Manual Feed Manual Feed 24
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 28
    a small document mark representing an item, directly insert the document manually. 2. Single Document Feed Mode (SADF) (The basic Key operation is the same as that in DR1600.) f ltem mark Document Document I u Single-Level Recording A document is fed in and filmed with a document mark being
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 29
    the Shutter Button. To generate a medium document mark, press the Batch Key (Indicator will light-up) before pressing the Shutter Button. To record a small document mark, directly press the Shutter Button. Item mark 3. Automatic Document Feed Mode (ADF) To generate document marks in the Automatic
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 30
    marks, a frame number can also be recorded on the B-ch side at top left of each image or frame of a roll of microfilm for indexing purposes. A frame number may setting procedure, see p. 30. 4-digit Display 0001 MINOLTA EXPOSURE TIME ninon I BLOCK - When the Shutter Button is pressed, the
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 31
    digit Display 0001 0001 0001 MODE CHANGE BLOCK BATCH l=1 1 - EXPOSURE TIME nnn s r1 an n LI U LI I LIUU i I nLInUnL1 I MOO< EARN ITEM I I - To record the number corresponding to the large document mark (the first 4-digit field), press the Block Key, then press the Shutter Button. - To
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 32
    MODE If the Auto Exposure Mode fails to produce optimum exposure condition, the Manual Exposure Mode can be used for better microfilming results. When in the Manual Exposure Mode, the machine allows you to vary the exposure time in the range between 50 ms and 2,000 ms. • Procedure: EXPOSURE
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 33
    CHOICE MODES ■ CHOICE MODES The microfilmer offers ten Choice Modes, CHO to CH9, allowing you to define the various priority modes which are automatically selected when the machine is turned ON. 1.
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 34
    mode Automatic Document Feed Mode Single Document Feed Mode Manual Document Feed Mode L H - 1=.:,7 Document mark recording level V No document mark 7 I Single-level recording 7 C Dual-level recording 3 Tri-level recording ru-3 L H Single-level document mark size 0 Medium document mark
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 35
    Mode 1- 11_11 LI 1 1 Number 17 Li Description Dual-level document mark size (combination) Item Batch Small Me.dium I Medium Large i--7 Small Large r 11_ 17 Frame number display (no. of digits) n l-/ 12-digit A-mode - EXPOSURE TIME When BLOCK Key is pressed: BLOCK - Incremented by
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 36
    18.4 10.0 18.5 (Standard) 10.1 18.6 10.2 18.7 10.5 19.0 Single 11.75 23.5 Double Document mark recording position. The position of the 2.3 mm width mark in single-level recording can only be varied. --I NOTE When you setting the document blip mark position between 1.21 mm to 4.21 mm
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 37
    USING THE IMPRINTER (OPTION) [DAR2800] • USING THE IMPRINTER (OPTION) [DAR2800] The DAR2800 microfilmer offers an optional Imprinter that prints the same frame number as that recorded on the film, thereby providing a means of managing the documents. To use this capability, press the Imprint Select
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 38
    2. Changing the Print Position The Print Position Indicator is graduated in 13 steps as follows: STOP, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, and END. When the dial is turned one step, the print position is shifted about 25.4 mm (1") in the crosswise direction. The entire range of shift is about 250 mm
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 39
    (2) Turn the Print Position Moving Knob counterclockwise so that the Print Position Indicator reads "STOP." (3) Press the Ribbon Release Lever to open the Ribbon Cover. L 0 ® Installation (4) Hold onto the both sides of the Ribbon Cartridge as shown, lift the Cartridge up slightly, and pull it out
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 40
    Feed Knob faces front and let the Pins of Cartridge caught in the Hooks. (5) Insert the exposed ribbon portion into the space between the Ribbon Guide and Platen and push the Ribbon Cartridge into position until a click is heard. - NOTE Take hold the Print Position Moving and push the Ribbon
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 41
    When documents are misfed during a filming process, remove them by the following procedure. When a document is misfed, the machine stops its microfilming operation and the Document Misfeed Indicators on the Control Panel show where the documents are located, including those already filmed and those
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 42
    and pull out misfed document. Mount of the Document Guide Turn the Knob up to "STOP" when mount the Document Guide into position. • Bring documents stopped at the red Indicators back to the Document Feed Tray. They are yet to be filmed. • Place documents stopped at
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 43
    MAINTENANCE AND SERVICES ■ MAINTENANCE AND SERVICES 1. Replacing the Illumination Lamp When the ends of a fluorescent lamp turn black, it indicates that the lamp needs replacement. To ensure even illumination over the
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 44
    impair performance of any optical equipment. Keep the microfilmer clean at all times. Especially with DAR2800 which , always close the Doors in position and face the Lens downward for storage. OMachine • DR1600 Use synthetic detergent or alcohol to remove dirt off the Copy Board. • DAR2800 Wipe clean
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 45
    TROUBLESHOOTING ■ TROUBLESHOOTING Symptom Possible Cause OPower is not supplied to microfilmer darker image. • Set a faster exposure time in Manual Mode. • Film was loaded under excessive light. too thick *For troubles not covered in the above chart, call your service representative. • Correct
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 46
    DR1600/DAR2800 Operator's Manual NI Maintenance the Document Pressure Glass. Supplement As a document is being fed, the Document Pressure Glass and the Document Transport Belt became electrostatically changed. This
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 47
    or Key Operators Use When you need to call for service, the Key Operator should be prepared to provide the following information: 1. on Display etc. For your reference purpose. Model Name Serial Number MINOLTA DR1600/DAR2800 Installation Date Authorized Dealer's Name Tel. No. for Supply for
  • Konica Minolta DR1600 | DR1600/DAR2800 Operator Manual - Page 48
    MINOLTA 1989. 6 0806-7702-02 tf. Minolta Corporation, Document Imaging System, 101 Williams Drive, Ramsey, NJ07446, U.S.A. MINOLTA CAMERA CO., LTD., System Equipment Operations, 3-13, 2-chome, Azuchi-machi, Chuo-ku, Osaka 541, Japan Printed in Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Operator's
Manual
Al&
MINOLTA