Konica Minolta MS7000 MK II MS7000 MKII MSP 3500 User Manual
Konica Minolta MS7000 MK II Manual
View all Konica Minolta MS7000 MK II manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta MS7000 MK II manual content summary:
- Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 1
MS7000 MKII User's Guide - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 2
- Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 3
this device, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Make sure you observe all of the precautions listed in this manual. * Ver07 Please note that some parts of the contents of - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 4
supplied, only use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock. the power cord from the power outlet, and then call your authorized service representative. • Do not use an extension cord, in principle. Use - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 5
smoke, or unusual odor or noise. Immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result. • Do not keep using this product, if this product has - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 6
P-4 SAFETY INFORMATION • Do not use flammable sprays, liquids, or gases near this product, as a fire could result. • Do not leave a toner unit or drum unit in a place within easy reach of children. Licking or ingesting any of these things could injure your health. • Do not let any object plug the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 7
this product, always hold it by the locations specified in the operator's manual or other documents. If the unit falls it may cause severe personal other gases or chemicals are present. Failure to do so may shorten the service life of the product, cause damage or decrease performance. • Do not - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 8
P-6 SAFETY INFORMATION Do not touch or scratch the surface of the toner unit developing roller and the PC drum, as poor image quality could result. Use the supplies and consumables recommended by the dealer. Use of any supply or consumable not recommended could result in poor image quality and - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 9
troubleshooting tips as well as general precautions to be observed when operating the unit. To ensure the best performance and effective use of your unit, read this User's Guide instructions given in this User's Guide when handling the system and do not touch any part of the system the User's Guide - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 10
OZONE RELEASE (For all Users 1-8 WARNING LABEL 1-8 1.3 Safety Information (MSP 3000 Printer 1-9 Laser Safety 1-9 Internal Laser Radiation 1-9 For United States 1-9 Laser Safety 1-9 1-13 2 Precautions 2.1 Installation Precautions 2-1 Installation Site 2-1 Power Source 2-2 Grounding 2-2 ii - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 11
2-3 Operating Environment 2-5 Using the Printer 2-5 Care of Printer Supplies 2-6 3 Scanner 3.1 System Overview 3-1 3.2 System Configuration 3-2 PR Mode (connected to a printer 3-2 PC Mode (connected to a Format Selection Function 3-30 3.15 Selecting the Print Position 3-31 Center 3-31 iii - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 12
a Number 3-34 3.18 Using Auto Masking 3-35 Selecting Auto Masking 3-35 Operating Conditions for Auto Masking 3-35 3.19 Manual Masking Panels (Option 3-36 3.20 Using Manual Masking 3-37 Selecting Trimming 3-37 Defining an Area 3-38 Defining Two Separate Areas 3-38 Defining Page-by-Page Print - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 13
a Misfeed from the Paper Feeding Tray 5-10 Clearing a Misfeed from the Paper Cassette 5-12 Clearing a Misfeed from inside the Printer 5-13 6 Troubleshooting 6.1 Solving Irregular Printing Problems 6-1 7 Maintenance 7.1 System Care 7-1 Cleaning the Scanner Screen 7-1 Outer Covers 7-1 v - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 14
Contents Carrier Glass (Option 7-2 Cleaning the System Printer (Option 7-3 Cleaning the MSP 3500 Printer 7-3 Cleaning the Printer Exterior 7-4 Cleaning the Printer Interior 7-4 Paper Pickup Rollers 7-5 Cleaning the MSP 3000 Printer 7-10 8 Miscellaneous 8.1 Specifications 8-1 PC Mode 8-2 PR - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 15
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 16
1 Notes to Operators and Key Operators Interference-Causing Equipment Standard (ICES-003 ISSUE 4) (For Canada Users) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. CE Marking (Declaration of - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 17
of danger from the laser, provided the printer is operated according to the instructions provided in this manual. Since radiation emitted by the laser the mirror unit to the interior of the printer. WARNING The print head unit is NOT A FIELD SERVICE ITEM. Therefore, the print head unit should not - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 18
For United States CDRH Regulations This printer is certified as a Class (FDA) of the Department of Health and Human Services (DHHS). This means that the product does not performance of procedures other than those specified in this manual may result in hazardous radiation exposure. This is a - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 19
to Operators and Key Operators 1 All other users WARNING Use of controls, adjustments of performance or procedures other than those specified in this manual may result in hazardous radiation exposure. This is a semiconductor laser. The maximum power of the laser diode is 15mW, and the wavelength - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 20
1 Notes to Operators and Key Operators VARO Avattaessa ja suojalukitus ohitettaessa olet alttiina nakymattomalle lasersateilylle. Aja katso sateeseen. VARNING Osynlig laserstråining när denna del är öppnad och spärren är urkopplad. Betrakta ej stråien. For Norway ADVARSEL Dersum apparatet brukes - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 21
Notes to Operators and Key Operators 1 WARNING LABEL • Three laser caution labels are attached to the inside of the machine as shown below. 1-7 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 22
1 Notes to Operators and Key Operators OZONE RELEASE (For all Users) During printer operation, a small quantity of ozone is released. This amount is not large enough to cause any adverse affects or harm. However, be sure the room - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 23
of danger from the laser, provided the printer is operated according to the instructions provided in this manual. Since radiation emitted by the laser Laser Safety This printer is certified as a Class 1 Laser product under the U.S. Department of Health and Human Service (DHHS) Radiation Performance - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 24
1 All other users Notes to Operators and Key Operators WARNING Use of controls, adjustments of performance or procedures other than those specified in this manual may result in hazardous radiation exposure. This is a semiconductor laser. The maximum power of the laser diode is 8.8 × 10-4W and the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 25
Notes to Operators and Key Operators 1 VARO Avattaessa ja suojalukitus ohitettaessa olet alttiina nakymattomalle lasersateilylle. Aja katso sateeseen. VARNING Osynlig laserstråining när denna del är öppnad och spärren är urkopplad. Betrakta ej stråien. For Norway ADVARSEL Dersum apparatet brukes - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 26
1 WARNING LABEL Notes to Operators and Key Operators 1-12 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 27
Notes to Operators and Key Operators 1 OZONE RELEASE (For all Users) During printer operation, a small quantity of ozone is released. This amount is not large enough to cause any adverse affects or harm. However, be sure the room - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 28
below will ensure optimal performance throughout the long life of service for which it was designed. 1. A well-ventilated place place that is free from any object that would block the heat exhaust duct of the printer. 8. A place away from curtains or anything else that is easily flammable. 9. An - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 29
to become caught underneath the weight of the unit. Grounding To prevent electrical shocks caused by electrical leakage, always ground the printer. 1. Connect the grounding wire to: - The ground terminal of the outlet. - A grounding contact that complies with the local electrical standards. 2. NEVER - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 30
rear of the unit as well as it's right and left sides to provide ample space for the ventilation ports to dissipate heat. MSP 3500 Printer: For ease of operation, maintenance and replenishment of supplies, the minimum clearance diagrammed below is required. Install the unit in an area that allows - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 31
Precautions 2 MSP 3000 Printer: For ease of operation, maintenance and replenishment of supplies, the minimum clearance diagrammed below is required. Install the unit in an area that allows easy access. 150mm 5-7/8" 150mm 5-7/8" 150mm 5-7/8" 2-4 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 32
Humidity: 15% to 85% with a fluctuation of 20% per hour. Using the Printer To ensure the optimum performance of the printer, follow the precautions listed below: 1. NEVER open any Cover, or turn OFF the printer during printing. 2. NEVER bring any magnetized object or flammable gas or liquid close to - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 33
loaded onto the print tray, in a sealed plastic bag in a cool, dark place. 3. Only use Toner Cartridges that are exclusively designed for use with this printer. 4. Keep supplies out of the reach of children. 5. If you get toner on your hands, wash them in cool water and mild neutral detergent. 6. If - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 34
Overview Scanner Projection Lenses Single-Focus Lens Zoom Lenses Scanner 7.5x Film Carriers FC-5 UC-2 9-16x RFC-15A 13-27x 20-50x • Prism • Manual Frame Masking Unit • AF Lens Modification Kit • Auto Focus Unit • USB I/F Kit • Foot Switch Kit Controllers MARS MINI CONTROLLER 2 RFC-15M - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 35
computer) The Scanner is connected to a personal computer and the scanned images can be uploaded to the computer. Connection to a personal computer and printer can be switched using Control Panel. Refer to "Selecting the Connection Mode" on page 3-45. For except USA and Canada area: An optional - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 36
to change the size of the image on the Screen. Supports the viewing of microfiche. Contains a Projection Lamp (halogen lamp) which projects the film image onto the Screen. Connects the scanner to the printer through an interface cable. Connects the scanner to the Personal Computer through - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 37
Scanner 3 9. Power Switch: 10. Connectors: 11. Power Cord Socket: 12. Fuse Holder: 13. Total Counter: 14. Power Cord: Used to turn power to the unit ON and OFF. Provides connection points for the various options (Film Carrier and Controller). Plug the power cord furnished with the Scanner into - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 38
can be memorized.) 1) Negative or positive 2) Print mode 3) Print position* 4) Paper size* 5) Print image density 6) Exposure mode 7) Centering or Fit 8) Manual Masking 9) Auto Masking 10) Auto Skew Correction 11) Horizontal Area setting 12) Vertical Area setting 13) Electrical Zoom magnification 14 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 39
Scanner 3 2 Lamp Illuminance Key Use to manually adjust the Projection Lamp illuminance. When the Projection Lamp is OFF, it can be turned ON again by pressing any key. 3 Film Type Key Rotates - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 40
. PR mode: Selects the size of paper to be used for printing. When the printer's Paper Feeding Tray is loaded with 8-1/2" x 1" (A4) paper and the paper loaded during the Auto or Manual Exposure mode. The Darker key supports darker image density and the Lighter key supports lighter image density. 11 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 41
running out of toner and lights up when the cartridge has completely run out of toner. Add Paper Indicator: Lights up when the Printer is not loaded with the paper size selected for use, or when either the Paper Feeding Tray or Paper Cassette has run out of paper - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 42
with the Shift Key, the resolution of the Scanner is set. When the Scanner is connected to the MSP 3500 Printer: 6H When the Scanner is connected to the MSP 3000 Printer: 4H and 6H When the Scanner is connected to the PC: 2H, 3H, 4H, 6H and 8H * 4H represents 400dpi - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 43
is selected. 2 Masking Key When pressed, this key rotates from OFF to the Trimming or Masking functions if the system is equipped with an optional Manual Masking Kit. Masking: Prints only the image outside of the area that is defined on the Screen. Trimming: Prints only the area of the image - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 44
of the image during printing. * After printing, the skew can be reset or retained. Contact your Technical Representative for more information. 5 Manual Focus Keys Press repeatedly to manually adjust the focus of the image on the Screen. 6 AF (Auto Focus) Key When this key is pressed, the Auto Focus - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 45
Procedure * Only MSP3500 displays the code. Display Code * * * * Description The power to the printer is OFF or there is a problem with the connection of the interface cable to the printer. Turn ON the printer or make sure that the interface cable is securely connected. The upper cover of the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 46
3 Scanner Display Code Description The Scanner is connected to the PC and ready for scanning by pressing the Start Key. This display is blinking when the Scanner is in operation. The Scanner is not connected to the PC. Turn ON the PC or connect the Scanner to the PC with the interface cable. The - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 47
Scanner 3 Misfeed Clearing Procedure Locate the misfeed using the code and perform the misfeed clearing procedure. Display Code Description The wrong size paper has been loaded in the Paper Feeding Tray. Load the set size paper in the set direction. This code also appears when two or more sheets - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 48
Description Optical path switching failure A Scanning malfunction A Condenser Lens Motor malfunction A Fan Motor malfunction Imperfect auto focusing Printer A Fusing Unit malfunction A Laser malfunction A Polygon Motor malfunction A Main Drive Motor malfunction An Imaging cartridge drive - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 49
) *When 11" x 17" (A3) is selected Auto Centering The system masks the center of the image appearing on the screen through the Manual Masking Panel function. *The Manual Frame Masking Kit (option) is required. The system masks two areas of the center of the image appearing on the screen through the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 50
3 Scanner Screen Image → Print Image Auto Skew Correction Description The unit automatically correct any skew of the image when printed. Page-by-Page Print The system takes two film images that appear side-by-side on the screen and prints them on separate 8-1/2" x 11" (A4) sheets of paper. - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 51
Turning the Power On and Off Turning ON 1 Press the Power Switch of the scanner to the ⏐ (ON) position. 2 Press the Power Switch of the printer to the ⏐ (ON) position. 3 The indicators on Control Panel 1 light up and the system starts the initialization operation. When the Wait Indicator goes out - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 52
3 Turning OFF 1 Press the Power Switch of the scanner to the (OFF) position. Scanner 2 Press the Power Switch of the printer to the (OFF) position. 3-19 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 53
to stand idle for a predetermined period of time. When the unit enters the Auto Power Save mode, power to the Scanner projection lamp and the printer heater is automatically shut down to save power consumption. A User Mode function is available that allows the user to set the time it takes the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 54
density → See page 3-32. Use Auto Exposure to automatically determine the optimum image density for the application. The image density can also be set manually by using the Exposure Adjustment keys (Darker or Lighter). 8. Enter the number of prints to be made → See page 3-34. Using the Multi-Print - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 55
4 2 or 3 3 or 4 4 4 3 or 4 3 or 4 4 4 4 4 4 This list shows the standard types of film and the recommended zoom ratios of lenses to be used with the system printer. The size and format of one frame of film may vary depending on the shooting conditions. Zoom the lens in and out to find the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 56
Lens Unit towards the front of the Scanner. 3 Slide the new Projection Lens Unit all the way into the Scanner along the Lens Holder Guide. When the Projection Lens Unit is slid into position, the Scanner automatically selects the optimum screen brightness according to the type of lens being used - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 57
Scanner 3 3.11 Positioning the Film Image Marked on the Screen are the size frame markers that correspond to the scanning size. Through zooming and image rotation, and by operating the Film Carrier mounted on the system, position the image on the Screen so that the image fits in the scanning size - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 58
press the AF (Auto Focus) Key to let the Scanner automatically bring the image into focus. Focus AF * You can use the Focus (Manual Focus) Keys to manually adjust the focus of the image on the Screen. → See page 3-11. Image Rotation 1 Turn the Image Rotation Knob as necessary to turn - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 59
Scanner 3 * If the Auto Skew Correction Key is turned ON, the system will automatically correct any skew of the image when printed. 3-26 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 60
key. Nega/Posi Scanner The system cannot determine the polarity of certain types of film. Should this occur, the film type should be selected manually. The system does not detect exterior conditions such as when the glass surface of the Carrier is dirty or scratched. Nega (negative film) 1 If - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 61
Scanner 3 Posi (positive film) 1 If positive film is to be used, Posi press the Film Type Key to select Posi. 3-28 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 62
Each time the key is pressed, the system selects a new paper size from the currently available sizes. If the Printer is not loaded with a desired size of paper, load paper into the printer. Scanner Using the Auto Paper Selection Function When the Paper Feeding Tray is loaded with 8-1/2" x 11" (A4 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 63
Scanner 3 The Auto Paper Selection function can be used only for a combination of 11" x 17" (A3) and 8-1/2" x 11" (A4) . The Page-by-Page function cannot be selected when the Auto Paper Selection capability is being used. When a 7.5x or 7-7.5x lens is being used, the Auto Paper Selection function - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 64
3 3.15 Selecting the Print Position Center 1 The system prints the image that appears in the center of the screen. Scanner Left 1 The system makes a print of the image that appears on the left side of the screen. Page-by-Page 1 The system prints the images that appear on both the left and right - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 65
, either Lighter or Darker, to set the desired image density. Press Lighter : to make the image lighter. Press Darker : to make the image darker. Using Manual Exposure 1 Press the Exposure Mode key and select the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 66
3 2 Press the appropriate Exposure Adjustment key, either Lighter or Darker, to set the desired image density. Press Lighter : to make the image lighter. Press Darker : to make the image darker. Scanner 3-33 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 67
Scanner 3 3.17 Entering the Number of Prints to be Made NOTE: This function is only available on the PR mode. 1 to 9 1 Enter the desired number of prints using the Multiprint Key "1". If the "1" key is pressed when "9" is shown on the Multi-Print Display, the number on the display is incremented - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 68
3 Scanner 3.18 Using Auto Masking The Auto Masking function prevents the frame (non-image area) of a film image from appearing on the print. Selecting Auto Masking 1 Press the Auto Masking key to turn ON this function. Operating Conditions for Auto Masking A. The image area of the screen - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 69
Scanner 3 3.19 Manual Masking Panels (Option) 1 23 4 1 Lengthwise Area Indication Panel Use to specify the print area in the vertical left ends. For your information, the keys on the right and left ends are invalid for the Manual Masking Panels intended for use in the metric areas. 3-36 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 70
Masking Scanner NOTE: Under the PC mode, the print (scan) area can be defined using the Manual Masking Panels. The Trimming and Masking functions cannot be used in the PC mode. The optional Manual Masking Kit allows you to specify an area for printing of the displayed image through two separate - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 71
Scanner Defining an Area 1 Define the end points for both the vertical and horizontal areas of the image on the screen using 3 the green lights on the area indication panels. 4 3 1 2 The points defining the vertical and horizontal area can be selected in any order. Blinking lights on the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 72
3 Defining Page-by-Page Print Area 1 Using the vertical and horizontal points on the Area Indication Panels, define the print areas of the image on 5 the Screen. 6 Scanner 1 2A3 4 The horizontal indicator marked A does not light up and cannot be used for defining an area. Four different areas - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 73
Selecting Masking Press the Masking key to select given area of the image. (Masking) when you want to mask a The basic operation for manual Masking is similar to Trimming. Please refer to the previous procedures on Trimming and defining areas for instructions on performing manual Masking. 3-40 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 74
3 Scanner 3.21 Using Centering and Fit Once the image on the Screen has been either "manually trimmed" or "auto masked", the Image Centering function moves the image to the center of the print. The Fit function however, fits the image on - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 75
Scanner Fit 1 Press the Centering/Fit key to turn ON Fit. 3 Centering/Fit Fit mode cannot be used when the Scanner is connected the PC. 3-42 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 76
3 Scanner 3.22 Using the Cycle Print Mode This function automatically scans the next image following a preset period of time. Images are manually loaded onto the Carrier Glass in between cycles. This is a system setting that must be entered by an authorized Technical Representative. If you want - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 77
Print Mode is canceled. The "No. of Copies" value flashes during the "scanning" and "waiting" operations. The next scanning job can be started manually by pressing the Start key before the system automatically initiates the same job. 2 To pause an operation during the Cycle Print Mode, press the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 78
Scanner 3.23 Selecting the Connection Mode The Scanner connection can be selected between PR (connection to the Printer) and PC (connection to the Personal Computer). 1 Hold down the Shift Key and the PC the display is switched from PC to Multi-Print, the connection to the Printer is valid. 3-45 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 79
resolution is displayed. 2 Press the Resolution Key while holding down the Shift Key to set the resolution. Connection mode PR mode: MSP 3500 Printer PR mode: MSP 3000 Printer PC mode Resolution 600 dpi 400 dpi 600 dpi 200 dpi 300 dpi 400 dpi 600 dpi 800 dpi ∗ Display 6H 4H 6H - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 80
3 Scanner 3.25 Registering the Job Program The present setting state can be registered in up to 3 program registration locations (1J, 2J and 3J). 1 Press the Memory Input Key in the Setting mode. 1J starts blinking. To change the program registration location, press the 1 Key. The display is - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 81
Scanner 3 3.26 Calling the Job Program The registered Job program can be called. 1 Press the Shift Key and the Job Recall Key together. 2 Each time the Job Recall Key is pressed while the Shift Key is held down, the display is switched in order of 1J → 2J → 3J. 3 When the desired setting is - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 82
3 Scanner 3.27 Using the Electrical Zoom In addition to the zooming by the Lens, the Electrical Zoom function has been provided for magnifying the image when it is printed. NOTE: This function is only available on the RP mode. Zoom + When the Zoom+ key is pressed together with the Shift Key, the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 83
Scanner 3 The Zoom magnification is displayed in the Multi-Print Display to 3 decimal places. The Zoom magnification level is displayed in the Exposure Display. Example:When the magnification is 0.50x, it is displayed as 50. When the magnification is 1.50x, it is displayed as 150. When the Zoom - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 84
3 Clearing the Zoom magnification When the Zoom clr key is held down together with the Shift Key for over one second, the standard magnification (1.00x) is resumed. Scanner 3-51 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 85
Scanner 3 3.28 Adjusting the Illumination of the Screen The illumination of the screen can be adjusted. 1 Press the Illumination Key to adjust the illumination of the screen. The screen is gradually darkened until it is turned OFF. When any key is pressed, the illumination returns to the maximum - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 86
3 Scanner 3.29 Replacing the Projection Lamp Use the following procedure to replace the Projection Lamp whenever a reduction in brightness on the screen is detected or whenever the lamp burns out. Make sure that the replacement lamp is specified for use with this scanner. If the Projection Lamp - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 87
Scanner 3 3 Remove the Projection Lamp, together with the Lamp Socket, from the Projection Lamp Unit. 4 Unplug the Projection Lamp from the Lamp Socket. 5 Insert a new Projection Lamp so that the mark on its base is facing upwards. Make sure that the new Projection Lamp is inserted securely so - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 88
3 6 Insert the Projection Lamp all the way into the Lamp Holder of the Projection Lamp Unit. 7 Slide the Projection Lamp Unit securely back into place. Scanner 3-55 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 89
: Use to open the Top Cover. When printing in paper B4 or larger, fold open. Light indicates when the Printer is turned ON. Use to turn the Printer ON and OFF. Slide the guides to secure the paper stack. Capable of holding up to 200 sheets of standard-size paper ranging from 8-1/2" × 11 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 90
8 Interface Connectors: 9 Power Cord Socket: Facilitates connections for the Scanner. The Printer has two connectors to facilitate connection with two separate Scanner units. The power cord is plugged into this socket. 10 Top Cover: 11 Image Transfer - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 91
MSP 3500 Printer 4 4.2 Paper Specifications Use only the following types of paper: ● Type Plain and recycled paper (weight 16 to 24 lbs. / 60 to 90 g/m2) ● Size Standard - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 92
4 4.3 Set the Paper Loading Paper into the Paper Feeding Tray 1 Open the paper feeding tray. MSP 3500 Printer 2 Fan a stack of paper. 3 Align the edges of the paper, and then load it with its printing-side up. Often, an arrow on the paper - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 93
MSP 3500 Printer 4 4 While pressing the button on the right side of the media guide ➀, slide the media guide to adjust it ➁. Attention Make sure the paper fit easily between the guides. Improperly adjusted guides may cause poor print quality, paper jams, or printer damage. 4-5 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 94
4 Loading Paper in the Paper Cassette 1 Pull out the paper cassette until it stops. MSP 3500 Printer 2 While pressing the release buttons (one on each side) ➀, remove the paper cassette ➁. 3 Remove the cassette cover. 4-6 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 95
MSP 3500 Printer 4 4 Lift up the gray lever on the right end of the paper retainer ➀, and then slide the paper retainer to the right ➁. 5 Lift up on - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 96
the paper retainer. Attention Make sure the paper retainer is seated properly. MSP 3500 Printer 8 Align the four edges of the paper, and then load the paper printing side button on the paper guide ➀, and then slide the guide against the edge of the paper ➁. Attention The paper should fit easily - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 97
cover. 11 Install the paper cassette, inserting as far as possible into the printer. 12 When printing on paper B4 or larger, fold open the output tray extension. 13 Affix the paper size labels (supplied with the printer) to the paper cassette in order to indicate the size of loaded paper. 4-9 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 98
Never touch the copper or brass electrodes ➀ or electrical parts that are located inside the top cover and underneath the toner cartridge, as a printer malfunction can result. Be careful not to touch ➁ around the image transfer roller (touching certain parts in this area may result in reduced print - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 99
MSP 3500 Printer 4 2 Remove the used toner cartridge. 3 Remove the new toner cartridge from its protective box. 4 Peel off the packing tape. Attention Hold the toner cartridge by - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 100
possible. If some toner remains on your clothes, use cool, not hot, water to rinse the toner off, provided your clothing is washable. MSP 3500 Printer WARNING If you get toner in your eyes, wash it out immediately with cool water and consult a doctor. 6 Align the tabs on the cartridge (one - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 101
MSP 3500 Printer 4 7 Close the top cover, pushing it down until it locks into place. Attention Do not transport the printer with the toner cartridge installed. If toner spills within the printer, decreased print quality may result or the printer may be damaged. 4-13 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 102
4.5 Replacing the Exhaust Filter The exhaust filter on the back of the printer is replaced when you replace a toner cartridge. How do I replace the exhaust filter? 1 Remove the used exhaust filter. Dispose of it according to your local - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 103
MSP 3500 Printer 4 4.6 When the Paper Misfeed Indicator Lights Up If the Misfeed Indicator lights up along lights up along with a P1, P2 or P3 code: A misfeed has occurred in the Printer. Clear the sheet of misfed paper by following the procedure given below. CAUTION The Fusing Unit inside the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 104
4 MSP 3500 Printer Clearing a Misfeed from the Paper Feeding Tray 1 Remove all paper from the paper feeding tray. 2 Pull out the misfed paper. 3 Correctly load the paper into the paper feeding tray. 4 If necessary, open and close the top cover to cancel Misfeed Code. 4-16 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 105
MSP 3500 Printer 4 Clearing a Misfeed from the Paper Cassette 1 Pull out the cassette until it stops. 2 While pressing in the release buttons (one on each side), remove the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 106
4 5 Install, the cassette, inserting it as far as possible into the printer. Check that the paper remaining in the cassette is loaded correctly before installing the cassette. Make sure no paper remains mjsfeed under the roller in the cassette. MSP 3500 Printer 4-18 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 107
Never touch the copper or brass electrodes ➀ or electrical parts that are located inside the top cover and underneath the toner cartridge, as a printer malfunction can result. Be careful not to touch ➁ around the image transfer roller (touching certain parts in this area may result in reduced print - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 108
4 2 Remove the toner cartridge and store it in a light-free protective bag. MSP 3500 Printer 3 If the paper is stopped by the fuser, lift the green levers on each side, and then slowly pull out the paper from the roller. - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 109
paper feed roller Cover. 8 Align, the, tabs on the toner cartridge (one on each side) with the notches in the printer, and then insertthe cartridge as far as possible. Attention Do not touch the rollers or gears within the printer; otherwise, the printer may be damaged. 9 Close the top cover. 4-21 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 110
4 MSP 3500 Printer Clearing a Misfeed from output bin 1 Remove the paper from the output bin. 2 If necesssary, gently pull out any paper thats is still jammed. 4-22 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 111
open the Upper Unit. 2 Power Indicator: Light indicates when the Printer is turned ON. 3 Print Tray: Prints are output from the Printer, face down onto this tray which can hold up to 500 sheets of standard paper. 4 Paper Guides: Slide the guides to secure the paper stack. 5 Paper Feeding Tray - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 112
. 11 Fusing Unit: Permanently fixes the image onto the sheet of paper. 12 Interface Connectors: Facilitates connections for the Scanner. The Printer has two connectors to facilitate connection with two separate Scanner units. 13 Imaging Cartridge: Where the image is generated for transfer onto - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 113
MSP 3000 Printer 5 5.2 Paper Specifications Use only the following types of paper: Type Plain and recycled paper (weight 16 to 24 lbs. / 60 to 90 g/m2) Size Standard - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 114
Paper into the Paper Feeding Tray 1 Swing down the Paper Feeding Tray. MSP 3000 Printer 2 Fan the paper stack thoroughly and align the edges. 3 Load the paper stack face up in the tray and adjust the Paper Guides to secure the paper stack. Make sure that the paper stack does not exceed - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 115
1 Pull the cassette out of the Printer and open the Cover. 2 Press down the Paper Lifting Plate until it locks. Fan the paper stack thoroughly, align the edges, and place the paper in the cassette. 3 Secure the paper stack in the Paper Cassette with the Paper Guides. Make sure that the paper - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 116
5 4 Close the Cover and insert the cassette into the Printer. MSP 3000 Printer 5-6 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 117
MSP 3000 Printer 5 5.4 Replacing the Toner Cartridge 1 Open the Upper Unit by pulling the Upper Unit Lock Release Lever forward. Push the Print Tray in before opening the Upper Unit. 2 Remove the old Imaging Cartridge from the printer. 5-7 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 118
shake it well in the directions indicated by the arrows. 4 Remove the seal from the Imaging Cartridge by pulling it steadily straight out. MSP 3000 Printer 5 Shake the Imaging Cartridge four or five more times as shown to evenly distribute the toner inside. 6 Slide the pins located on both sides - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 119
MSP 3000 Printer 5 7 Close the Upper Unit. 5-9 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 120
. Clear the sheet of misfed paper by following the procedure given below. CAUTION The Fusing Unit inside the printer becomes very hot during operation. To avoid a burn, be very careful not to touch it. Clearing a Misfeed from the Paper Feeding Tray 1 Open the Upper - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 121
MSP 3000 Printer 5 3 Remove the sheet(s) of paper that caused the misfeed from the Paper Feeding Tray. 4 Check that no misfed paper is left in the Printer and then reinstall the Imaging Cartridge. 5 Close the Upper Unit. 5-11 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 122
1 Open the Upper Unit by pulling the Upper Unit Lock Release Lever forward. Push the Print Tray in before opening the Upper Unit. MSP 3000 Printer 2 Remove the Imaging Cartridge. Be sure to cover the Imaging Cartridge with a heavy cloth to protect it from light when it is removed from the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 123
and then reinstall the Imaging Cartridge. 5 Close the Upper Unit. Clearing a Misfeed from inside the Printer 1 Open the Upper Unit by pulling the Upper Unit Lock Release Lever forward. Push the Print Tray in before opening the Upper Unit. 2 Remove the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 124
the sheet of paper toward the output end of the Fusing Unit as shown. 5 Reinstall the Imaging Unit and close the Upper Unit. MSP 3000 Printer 5-14 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 125
Troubleshooting 6 6 Troubleshooting 6.1 Solving Irregular Printing Problems Use the following procedures to fix minor printing problems. If print quality does not improve after implementing the procedures below, contact your Technical Representative. Symptom Light image Cause Print density is - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 126
6 Troubleshooting Symptom Uneven image density Cause Action Toner in the Imaging Remove the Imaging Cartridge is not even- Cartridge, shake it sev- ly distributed. eral times and replace. A BCDE F A BCDE F A BCDE F A BCDE F A BCDE F Blank print The Printer has mal- Contact your Technical - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 127
Maintenance 7 7 Maintenance 7.1 System Care The system should be cleaned on a daily basis for optimal operating conditions. Cleaning the Scanner Screen 1 With a damp cloth, clean and remove any dust or debris from the surface of the Screen. CAUTION NEVER use alcohol or any other solvent when - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 128
7 Carrier Glass (Option) 1 With a damp cloth, clean and remove any dust or debris from the surface of the Carrier Glass. Before cleaning the Carrier Glass, be sure to remove the Projection Lens from the Scanner. 2 To open the Carrier Glass, pull the handle of the Microfiche Holder. Following the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 129
Interior (paper feed rollers) Paper stops being fed from the paper tray(s). Note: We recommend that you do not clean elsewhere inside the printer. If necessary, contact the authorized dealer. What cleaning materials should I use? Exterior⎯Use A soft dry cloth to clean the control panel. A soft - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 130
all interface cables before cleaning. Do not spill water or detergent into the printer; otherwise the printer will be damaged and an electric shock may occur. Read all caution and warning labels carefully, making sure to follow any instructions contained in them. These labels are located on the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 131
Maintenance 7 Paper Pickup Rollers The printer's pickup rollers contain a sensor to detect the density of media passing by. How do I clean the paper feeding tray pickup rollers? 1 Turn off the printer. 2 Open the top cover. 7-5 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 132
Never touch the copper or brass electrodes ➀ or electrical parts that are located inside the top cover and underneath the toner cartridge, as a printer malfunction can result. Be careful not to touch ➁ around the image transfer roller (touching certain parts in this area may result in reduced print - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 133
. 7 Cover 6 Close the paper feed roller cover. Paper feed rollers 7 Align the tabs on the cartridge (one on each side) with the notches in the printer, and then insert the cartridge as far as possible into its compartment. 7-7 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 134
7 8 Close the top cover. Maintenance 9 Turn on the printer. How do I clean the paper cassette pickup rollers? When the sensor gets dirty or dusty, print quality is degraded. 1 Pull the paper cassette out of the printer until it stops. 7-8 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 135
Maintenance 7 2 Remove the paper cassette. 3 Wipe the pickup roller with a soft dry cloth. 4 Reinsert the paper cassette into the printer. 7-9 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 136
Maintenance CAUTION Use a soft cloth and NEVER use abrasives or corrosive detergents. 1 Before cleaning the Printer, turn OFF the power and unplug the cord from the power outlet. 2 Clean the exterior panels with a soft, dry cloth. A damp cloth and a mild home - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 137
for the unit. Specifications Specifications Type: Desk-Top Type Microfilm Scanner Type of Film: Microfiche, Jackets, Aperture Cards, lbs. (65kg) Standard Accessories: Power Cord, Printer cable, Prism Unit, User's Guide (this manual) Options: Projection Lenses, Fiche Carrier 5, Universal - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 138
x 11" or A4 Vertical/400 dpi/AE) 4 sec./Multi-frame scanning (8-1/2" x 11" or A4 Vertical/400 dpi/AE) PR Mode: MSP 3500 Printer Specifications Resolution: Output Scale: Printing Method: Developing System: Print Size: Warm-up Time: First Print Time: Print Speed: Multiple Printing: Paper Supply - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 139
Cassette 1 (250 sheets max.) Paper Cassette 2 (250 sheets max.): Option Printer's Power Consumption: Less than 750W Printer's Dimensions: 22"(W) x 20-1/2"(D) x 16"(H) or 561(W) x 521(D) x 409(H) mm Printer's Weight: 67-3/4 lbs. (28kg) * Specifications subject to - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 140
Masking ⎯ Enabled only when the Manual Frame Masking Kit (option) is mounted. Centering/Fit OFF Print Position Center Print Mode Text Resolution 600 dpi MSP 3500 Printer 400 dpi MSP 3000 Printer Electrical zoom 1.00 magnification * When any of these functions has been changed and - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 141
Miscellaneous 8 User Mode User mode allows the default values of various functions to be set or changed as necessary. Setting these default values according to the need of the user saves labor in making settings again each time the power is turned ON or Panel Reset is activated. Display Function - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 142
8 Miscellaneous Entering and Leaving the User Mode 1 Hold down the Shift key and Paper Selection key at the same time for 0.5 sec. The Multi-Print Display displays a "U." Paper Selection 11×17 81/2 ×11 81/2 ×11 User Mode C Shift 2 Press the Exposure Adjustment key (Darker or Lighter) to select - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 143
Miscellaneous 8 Settings in Each User Mode Function U1: Special Print Mode This function is not available. U2: Engineering Enhancement Mode Slight image distortion occurring in the scan direction can be corrected with this function. Before Correction After Correction 1 Select U2 in the User - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 144
8 Miscellaneous Code d0 d1 d2 d3 d4 d5 d6 d7 d8 Setting Value 0mm 0.5mm 1.0mm 1.5mm 2.0mm 2.5mm 3.0mm 3.5mm 4.0mm Initial Setting * U3: Auto Power Save Time it takes the unit to be automatically set into the Power Save mode can be set. 1 Select U3 in the User mode. 2 Press the Exposure Mode - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 145
. The date print position of Date Print is that set on the screen, regardless of the paper feeding direction in the printer. On the Screen d2 d1 Printer Output d4 d2 d3 d1 d2 d1 Feeding Direction (crosswise feeding) d4 d3 Feeding Direction (lengthwise feeding) d4 d3 1 Select U5 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 146
8 Miscellaneous 3 Press the Exposure Adjustment key (Darker or Lighter) to select the desired setting value. 4 Press the Start key to validate the setting value. Code d0 d1 d2 d3 d4 d5 Setting Value Initial Setting Turns OFF Date Print and Character Overlay functions * Date Print function ( - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 147
Miscellaneous 8 U7: Imprint Mode Set Time-of-day can be corrected for the Date Print function when it becomes wrong. 1 Select U7 in the User mode. 2 When the Exposure Mode key is pressed, both the Exposure Display and Multi-Print Display light up steadily. In the initial condition, the year - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 148
8 Miscellaneous U8: Total Scan Counter The number of scan sequences carried out by the Scanner can be displayed with this function. 1 Select U8 in the User mode. 2 Press the Start key. The number of scan sequences so far carried out by the Scanner is displayed. The following display represents - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 149
Disabled * (200V) * (120V) Auto power save Sets the unit to enable or disable the Enabled * ON/OFF Auto Power Save mode. Disabled Printer Heater Turns the Printer's heater OFF if the Disabled OFF system is left idle for a specific period of (PR mode only) time. 30 min. * * Priority is - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 150
8 Miscellaneous System Settings Description Selection Initial Setting Contrast setting To view subtle images with standard Lighter ranges of density clearly: Light (-1 ~ -7) To bring out the darker and lighter Normal * ranges of an image: Dark (+1 ~ +7) Darker The print function at the - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 151
For Key Operator's Use When you need to call for service, the Key Operator should be prepared to provide the following the Display, etc. For your reference purpose. Model Name MS7000 MKII Printer (MSP 3500) Printer (MSP 3000) Attached Accessories Installation Date Authorized Dealer's Name TEL - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 152
8 Miscellaneous 8-16 - Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 153
- Konica Minolta MS7000 MK II | MS7000 MKII MSP 3500 User Manual - Page 154
0816-7724-02 Copyright 2008 KYOKKO SEIKO CO., LTD. 2008.10
MS7000 MK
II
User
’
s Guide