Home » Konica Minolta Manuals » Scanners » Konica Minolta MS7000 MK II » Manual Viewer

Konica Minolta MS7000 MK II MS7000 MKII MSP 3500 User Manual - Page 107

Clearing a Misfeed from inside the Printer, around the image transfer roller touching

View all Konica Minolta MS7000 MK II manuals

Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

MSP 3500 Printer 4 Clearing a Misfeed from inside the Printer 1 Open the top cover. Attention Never touch the copper or brass electrodes ➀ or electrical parts that are located inside the top cover and underneath the toner cartridge, as a printer malfunction can result. Be careful not to touch ➁ around the image transfer roller (touching certain parts in this area may result in reduced print quality) or ➂ around the fusing unit (since the inside reaches temperatures of about 392 °F (200 °C), touching any part in this area may result in burns). 4-19

Section	Page
SAFETY INFORMATION	3
Warning and Precaution Symbols	3
Meaning of Symbols	3
Precautions for Routine	7
Welcome	9
Contents	10
1 Notes to Operators and Key Operators	15
1.1 The following safety rules should be observed	15
FCC Part 15 - Radio Frequency Devices (For U.S.A. Users)	15
WARNING	15
Interference-Causing Equipment Standard (ICES-003 ISSUE 4) (For Canada Users)	16
CE Marking (Declaration of Conformity) (For European Users)	16
Acoustic Noise	16
1.2 Safety Information (MSP 3500 Printer)	17
Laser Safety	17
Internal Laser Radiation	17
For United States	18
CDRH Regulations	18
All other users	19
For Denmark	19
For Finland, Sweden	19
For Norway	20
WARNING LABEL	21
OZONE RELEASE (For all Users)	22
WARNING LABEL	22
1.3 Safety Information (MSP 3000 Printer)	23
Laser Safety	23
Internal Laser Radiation	23
For United States	23
Laser Safety	23
CDRH Regulations	23
All other users	24
For Denmark	24
For Finland, Sweden	24
For Norway	25
WARNING LABEL	26
OZONE RELEASE (For all Users)	27
WARNING LABEL	27
2 Precautions	28
2.1 Installation Precautions	28
Installation Site	28
Power Source	29
Grounding	29
Space Requirements	30
Operating Environment	32
Using the Printer	32
Care of Printer Supplies	33
3 Scanner	34
3.1 System Overview	34
3.2 System Configuration	35
PR Mode (connected to a printer)	35
PC Mode (connected to a personal computer)	35
3.3 Parts of the Scanner	36
3.4 Control Panel Keys and Indicators	38
Control Panel 1 (Basic)	38
Control Panel 1 (Shift Function)	42
Control Panel 2	43
When Malfunctions/Call-Tech.-Rep. Indicator Lights up	45
3.5 Image Processing Functions	49
3.6 Turning the Power On and Off	51
Turning ON	51
Turning OFF	52
3.7 Auto Power Save Mode	53
3.8 Printing or Scanning Procedure	54
3.9 Selecting a Projection Lens	55
3.10 Replacing the Projection Lens	56
3.11 Positioning the Film Image	57
3.12 Zooming, Focusing, and Image Rotation	58
Zooming	58
Focusing	58
Image Rotation	58
3.13 Selecting the Film Type	60
Auto	60
Nega (negative film)	60
Posi (positive film)	61
3.14 Selecting the Paper Size	62
Selecting the Paper Size	62
Using the Auto Paper Selection Function	62
Using the Auto Film Format Selection Function	63
3.15 Selecting the Print Position	64
Center	64
Left	64
Page-by-Page	64
3.16 Selecting the Image Density	65
Using Auto Exposure	65
Using Manual Exposure	65
3.17 Entering the Number of Prints to be Made	67
1 to 9	67
10 to 99	67
Correcting a Number	67
3.18 Using Auto Masking	68
Selecting Auto Masking	68
Operating Conditions for Auto Masking	68
3.19 Manual Masking Panels (Option)	69
3.20 Using Manual Masking	70
Selecting Trimming	70
Defining an Area	71
Defining Two Separate Areas	71
Defining Page-by-Page Print Area	72
Clearing a Defined Print Area	72
Selecting Masking	73
3.21 Using Centering and Fit	74
Centering	74
Fit	75
3.22 Using the Cycle Print Mode	76
Specifying the interval between scanning operations	76
Operating in the Cycle Print Mode	77
3.23 Selecting the Connection Mode	78
3.24 Selecting the Resolution	79
3.25 Registering the Job Program	80
3.26 Calling the Job Program	81
3.27 Using the Electrical Zoom	82
Zoom +	82
Zoom -	82
Skip of magnification	83
Clearing the Zoom magnification	84
3.28 Adjusting the Illumination of the Screen	85
3.29 Replacing the Projection Lamp	86
4 MSP 3500 Printer	89
4.1 Parts of the Printer	89
4.2 Paper Specifications	91
Use only the following types of paper:	91
4.3 Set the Paper	92
Loading Paper into the Paper Feeding Tray	92
Loading Paper in the Paper Cassette	94
4.4 Replacing the Toner Cartridge	98
4.5 Replacing the Exhaust Filter	102
4.6 When the Paper Misfeed Indicator Lights Up	103
If the Misfeed Indicator lights up along with a P0 code:	103
If the Misfeed Indicator lights up along with a P1, P2 or P3 code:	103
Clearing a Misfeed from the Paper Feeding Tray	104
Clearing a Misfeed from the Paper Cassette	105
Clearing a Misfeed from inside the Printer	107
Clearing a Misfeed from output bin	110
5 MSP 3000 Printer	111
5.1 Parts of the Printer	111
5.2 Paper Specifications	113
Use only the following types of paper:	113
5.3 Set the Paper	114
Loading Paper into the Paper Feeding Tray	114
Loading Paper in the Paper Cassette	115
5.4 Replacing the Toner Cartridge	117
5.5 When the Paper Misfeed Indicator Lights Up	120
If the Misfeed Indicator lights up along with a P0 code:	120
If the Misfeed Indicator lights up along with a P1, P2 or P3 code:	120
Clearing a Misfeed from the Paper Feeding Tray	120
Clearing a Misfeed from the Paper Cassette	122
Clearing a Misfeed from inside the Printer	123
6 Troubleshooting	125
6.1 Solving Irregular Printing Problems	125
7 Maintenance	127
7.1 System Care	127
Cleaning the Scanner Screen	127
Outer Covers	127
Carrier Glass (Option)	128
Cleaning the System Printer (Option)	129
Cleaning the MSP 3500 Printer	129
Cleaning the Printer Exterior	130
Cleaning the Printer Interior	130
Paper Pickup Rollers	131
Cleaning the MSP 3000 Printer	136
8 Miscellaneous	137
8.1 Specifications	137
PC Mode	138
PR Mode: MSP 3500 Printer	138
PR Mode : MSP 3000 Printer	139
8.2 Initial Settings	140
User Settings on the Control Panel	140
User Mode	141
Entering and Leaving the User Mode	142
Settings in Each User Mode Function	143
System Settings by the dealer	149