Konica Minolta bizhub 3602P bizhub 4702P/4402P/3602P Safety Guide - Page 23

1 1.7 Operation precautions 1.7 Operation precautions To ensure the optimum performance of this machine, observe the precautions described below. Power source The power source requirements are as follows. - Use a power source with as little voltage or frequency fluctuations as possible. - Voltage fluctuation: Maximum + 6%/- 10% - Frequency fluctuation: Maximum ^ 3 Hz (at 50 Hz/60 Hz) Operating environment The environmental requirements for correct operation of the machine are as follows. - Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F (10°C) within an hour - Humidity: 15% to 85% with fluctuations of no more than 10% within an hour Storage of copies To store copies, follow the recommendation listed below. - Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading. - Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. - Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color copy is folded, the toner at the fold may peel off. Data stored in this machine For the machine with hard disk, it is suggested to delete all data stored in all hard disk areas using the overwrite all data function to prevent leakage of data prior to transfer or disposal of the machine, or returning of the leased machine. For details of the overwrite all data function, refer to the User's Guide. Contact your service representative before deleting data. It is recommended to backup HDD periodically as the measures for HDD defect. For the detail information of HDD backup, contact your service representative. 1-20 bizhub 4702P/4402P/3602P