Konica Minolta bizhub 40P/40PX bizhub 40P Reference Guide - Page 181
Setting the IP Address Manually
View all Konica Minolta bizhub 40P/40PX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Setting the IP Address Manually You may also manually set the printer's IP address, subnet mask, and gateway by following the instruction below. (See chapter 6, "Understanding the Ethernet Configuration Menus," for more information.) " When manually setting the IP address, turn off DHCP, BOOTP, or ARP /PING first. In addition, when the IP address is changed, add a new port or reinstall the printer driver. CAUTION You should always notify your network's administrator before changing the printer's IP address. 1 Turn on your PC and printer. 2 When the printer's message window displays READY, set the IP address. Press this key . . . (until) the message window reads . . . READY PROOF/PRINT MENU or if no optional hard disk kit is installed: PRINT MENU INTERFACE MENU JOB TIMEOUT ETHERNET TCP/IP Network Connection 163