Konica Minolta bizhub 4750 bizhub 4750/4050 Applied Functions User Guide - Page 19
[Date/Time Settings] - [Time Adjustment Settings], [Machine Settings]
View all Konica Minolta bizhub 4750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
1.5 Available operations in Administrator mode 1 [Date/Time Settings] - [Time Adjustment Settings] To display: Administrator mode - [System] - [Date/Time Settings] - [Time Adjustment Settings] Using the NTP (Network Time Protocol) server, you can automatically adjust the date and time of this machine. Register the NTP server used. To periodically adjust the date and time by connecting to the NTP server, specify an interval for adjusting the date and time. Item [Time Adjustment] [NTP Server Address] [Port Number] [Time Zone] [Adjustment Time] Description To automatically adjust the date and time of this machine using the NTP server, select [Enable]. [Disable] is specified by default. Enter the NTP server address. Use one of the following formats. • Example of host name entry: "host.example.com" • Example of IP address (IPv4) entry: "192.168.1.1" • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16" If necessary, change the NTP server port number. Normally, you can use the original port number. [123] is specified by default. Select a time zone (time difference from world standard time) to suit your environment. [GMT] is specified by default. Displays the latest date and time at which time correction was performed by connecting to the NTP server. Tips If time zone is specified, the standard time obtained from the server adjusted to your time zone is specified as the correction time. [Date/Time Settings] - [Daylight Saving Time Settings] To display: Administrator mode - [System] - [Date/Time Settings] - [Daylight Saving Time Settings] Specifies daylight saving time for the current country setting. Item [Daylight Saving Time] Description Select [Enable] to use daylight saving time. Also enter the time to be adjusted for daylight saving time (in minutes). [Disable] is specified by default. [Machine Settings] To display: Administrator mode - [System] - [Machine Settings] - [Machine Settings] Register device information of this machine, such as the name, installed place, and information of the administrator. Item [Device Name] [Device Location] [Device Information] [Administrator Name] [Administrator E-mail Address] [Do Startup Page] Description Enter the name of this machine (using up to 127 bytes). The name specified here is used as a part of the subject of Internet fax. Enter the location of this machine (using up to 127 bytes). Enter the information of this machine (using up to 127 bytes). Enter the machine administrator name (using up to 127 bytes). Enter the E-mail address of the machine administrator (using ASCII characters of up to 320 bytes). Select whether or not to print the start page when this machine is turned on. [Off] is specified by default. [Applied Functions] 1-13