Konica Minolta bizhub 601 bizhub 751/601 Network Administrator User Manual - Page 72
Sending and receiving IP address faxes
View all Konica Minolta bizhub 601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Setup items by operation 1 1.17 Sending and receiving IP address faxes Specify settings for sending and receiving IP address faxes. To use the IP address fax function, this machine must be equipped with an optional fax kit,a hard disk and an image controller. In order to use the IP address fax function, setting by a service engineer is required. For details, contact your service representative. The IP address fax enables communication on the IP network. Specify the host name or IP address for the destination to send a Fax. SMTP protocol is used for sending and receiving faxes. Because IP address faxes are sent and received via the SMTP server function of this machine, no SMTP server is required. Specify the settings according to the following flowchart. TCP/IP Settings IP Address Fax Function SMTP TX Setting SMTP RX Setting Header Information 1.17.1 1.17.2 Finish 2 Note For details on registering IP address fax addresses, refer to "Registering or editing an address book destination" on page 1-168. For details on the IP address fax operation, refer to the User's Guide [Network Scan/Fax/Network Fax Operations]. TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. IP Address Fax Function On the Administrator Settings screen of the control panel, select [Network Settings] - [Forward] - [3 Network Fax Setting] - [1 Network Fax Function Setting]. Specify the following setting. 2 Note For details on displaying the Network Setting screen, refer to "Displaying the Network Settings screen" on page 2-2. 751/601 1-59