Konica Minolta bizhub 658e bizhub 658e/558e/458e Security Operations User Manu - Page 44
Protecting Machine from Illegal Firmware Update, Setting the FW Update (USB) Password
View all Konica Minolta bizhub 658e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2.3 Protecting Machine from Illegal Firmware Update 2 2.3 Protecting Machine from Illegal Firmware Update When a log-on to the Administrator Mode becomes successful, this machine enables the operation of setting or changing the password required to update the firmware, which is performed by a service engineer using a USB memory. By setting the FW Update (USB) Password, the firmware of the machine can be protected from illegal update. The password entered is displayed as "*." NOTICE The following shows setting conditions for the password. Perform settings for the password fitting these conditions. Types of passwords FW Update (USB) Password Number of characters 0 to 20 characters Types of characters • Numeric characters: 0 to 9 • Alpha characters: upper and lower case letters • Symbols SPACE Selectable from among a total of 94 characters Conditions for setting/changes • A password only consisting of identical characters cannot be registered or changed. • The current password is not confirmed upon changing. • A new password to be set should not be the same as the current one. Setting the FW Update (USB) Password 0 For the procedure to call the Security Settings screen on the display, see steps 1 through 3 of page 2-15. 0 Do not leave the machine with the setting screen of Administrator Mode left shown on the display. If it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Mode. 1 Call the Security Settings screen on the display from the control panel. 2 Touch [FW Update (USB) Perm. Sett.]. bizhub 658e/558e/458e 2-20