Konica Minolta bizhub C3850 bizhub C3850/C3350 Fax Functions User Guide - Page 31
Sending a confidential fax [F-Code TX]
View all Konica Minolta bizhub C3850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4.5 Sending a confidential fax ([F-Code TX]) 4 4.5 Sending a confidential fax ([F-Code TX]) Confidential communication The confidential communication function is designed to communicate with specific people using a Confidential RX User Box that requires a registered number and a password. This ensures that fax communications are sent with enhanced security. Tips - The destination fax must have the F-code function. - You need to check the registration number of the recipient's Confidential RX User Box and the pass- word for confidential fax reception in advance. - This function cannot be used together with the following functions: Password TX, Polling TX, Polling RX Related setting (for the administrator) You can specify whether or not to use the F-Code TX function. To configure settings: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting] - [F-Code TX] (default: [ON]) Operation flow 1 Load the original. 2 Tap [Fax]. 3 Specify the destination. 4 Tap [Application] - [Fax Setting] - [F-Code TX], then tap [ON]. 5 Enter the [Sub Address] and [Password], then tap [OK]. % [Sub Address]: Enter the registration number of the Confidential RX User Box. % [Password]: Enter the communication password for confidential RX. 6 Press the Start key. Sending starts. [Fax Functions] 4-6