Konica Minolta bizhub C754 bizhub C654/C754 Trademarks Licenses User Guide - Page 20
Placing the original on the Original Glass, Original available on the Original Glass
View all Konica Minolta bizhub C754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
5.2 Placing the original on the Original Glass 5 5.2 Placing the original on the Original Glass Original available on the Original Glass Item Original types Original Size Original loading capacity Specifications Sheets, books (two-page spread), cards, three-dimensional objects Max. 11 e 17 (A3) Max. 4-7/16 lb (2 kg) Loading the original into the Original Glass Using the Original Glass allows you to scan an original such as a book or card, which is not available in the ADF. The maximum allowable weight of an original is 4-7/16 lb (2 kg). 1 Open the ADF. % Open the ADF by an angle of 20 degrees or more. If the original is placed on the original glass without the ADF being lifted at least 20 degrees, the correct original size may not be detected. 2 Load the original into the Original Glass with the required side facing downward. % Place the top side of the original at the back, and align the original to the mark at the left back of the Original Scale. When loading in a different orientation, be sure to specify the loading direction of originals. % When copying a highly transparent original such as transparencies or tracing paper, place a blank sheet that is the same size as the original on the original to enable clear scanning. NOTICE Do not place an original heavier than 4-7/16 lb (2 kg) on the original glass. Furthermore, do not use a excessive force to press down on a book or any other form of original that must be spread on the original glass. Otherwise, the machine may be damaged or a failure may occur. 3 Close the ADF. NOTICE When placing a thick book or a three-dimensional object, you do not need to close the ADF to scan it. A bright light may be emitted through the Original Glass. Be careful not to look directly at it. Note, however, that the light coming through the original glass is not a laser beam, and will not expose the user to related hazards. d Reference If you make a copy without closing the ADF, a shadow may be produced on the copy. This machine can erase such shadows when copying. For details, refer to [User's Guide: Copy Operations]. bizhub C754/C654 5-4