Konica Minolta bizhub C759 bizhub C759/C659 Security Operations User Manual - Page 98
Select [Overwrite] and touch [OK]., Overwrite All Data Function, main power switch
View all Konica Minolta bizhub C759 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
2.16 Overwrite All Data Function 2 3 Select the desired mode and touch [Delete]. 4 Select [Overwrite] and touch [OK]. 5 Make sure that a message appears prompting you to turn OFF and then ON the main power switch. Now, turn OFF and then turn ON the main power switch. % Check that all data has been overwritten and erased properly. Data is not erased properly if an error occurs during the procedure. For details, contact your Service Representative. % When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. if there is no wait period between turning the main power switch off, then on again, the machine may not function properly. % After the main power switch has been turned on, quickly turn it off and give the machine to the Service Engineer. If the Overwrite All Data function is executed by mistake, contact the Service Engineer. For details, contact your Service Representative. bizhub C759/C659/AccurioPrint C759 2-74