Konica Minolta bizhub PRESS C1060 bizhub PRESS C1070/C1070P/C1060/bizhub PRO C - Page 59
screen or the, Enter the zoom ratio or the image shift value using the keypad
View all Konica Minolta bizhub PRESS C1060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
% Press [Front] or [Back] to select the print side to be adjusted. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L & Enter the zoom ratio or the image shift value using the keypad, [,], or [+] on the screen or the Keypad on the control panel. - To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a value. [Vertical] is used to adjust the zoom ratio in the crosswise direction. [Horizontal] is used to adjust the zoom ratio in the paper feed direction. To enlarge the print side, enter the value with a positive mark (+). To reduce it, enter the value with a negative mark (-). The adjustment value changes 0.01% on a 1-step basis. Adjustment Range: [Vertical] -1.00 to +1.00, [Horizontal] -1.00 to +1.00* * [Horizontal] of [Back] must be specified between -0.80 and +0.20. - When not adjusting [Horizontal] of [Back], select [User Setting] - [Common Setting], then set [Back Side Magnification Adj.] to [OFF]. For details, refer to the HTML User's Guide. - To move the print side upward, downward, leftward, or rightward (image shift), press [Up/Down] or [Right/Left], then enter the value. To move the print side upward or rightward, enter the value with a positive mark (+). To move the print side downward or leftward, enter the value with a negative mark (-). The adjustment value changes 0.1 mm on a 1-step basis. Adjustment range: [Up/Down] -10.0 to +10.0, [Right/Left] -3.0 to +3.0 - To switch the positive mark (+) and negative mark (-), press [+/-]. - To reset a value, press [Clear]. - To adjust the zoom ratio and image shift, check the status in the center of a page. 5 5-10