Konica Minolta fi-7180 fi-5900C Get Started Guide - Page 12

Chapter2 INSTALLATION OF THE SCANNER 2.1 Installing the Scanner 1. Place the scanner at its installation site. For details on the scanner's dimensions and required installation space, refer to the fi-5900C Operator's Guide, chapter "10. Scanner Specifications". ATTENTION • The scanner weight is 50 kg (110 lb). Make sure two persons are available when moving the scanner. • When carrying the scanner, only grip the bottom side. 2. Connect the AC cable to the Power inlet of the scanner and plug it into an outlet. 2.2 Connecting the Scanner to Your PC When running Windows 95 or Windows NT 4.0, connect the scanner using the SCSI interface. When running Windows 98, Windows Me, Windows 2000, or Windows XP, connect either using the USB or SCSI interface. ATTENTION This scanner is provided with two interfaces: Ultra SCSI and USB 2.0 /1.1. Connect only one of the USB or SCSI cable. Windows 95 and Windows NT 4.0 do not support USB interface. ■ Connecting the USB Interface 1. Connect the USB cable to the USB connector. ATTENTION Use only the power cable provided by the manufacturer. The Function Number Display and the LED HINT may flash for an instant when plugging the AC cable into the outlet. This is not a mal- function. 2. Connect the other end of the USB cable to your PC. ATTENTION • Be sure to use the USB cable which comes with this scanner. Correct operation with commercially available cables is not guaranteed. • When connecting to a USB hub, use the first stage USB hub that is closest to the computer. If you use the second or later hub stages, the scanner may not operate correctly. • If you connect the scanner with USB 2.0, it is required that the USB port and Hub are compliant with USB 2.0. The scanning speed may slow down if it is connected with USB1.1. 4