Konica Minolta fi-7180 fi-5750C Operations Guide - Page 61
ADF Front Side, ADF Back Side, ADF Duplex, Flatbed
View all Konica Minolta fi-7180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
• Introduction CONTENTS 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.6 How to use the Scanner Driver 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix 2.6 How to use the Scanner Driver (Continued from the previous page) Contrast Sets the contrast between light and shadow of the scanned image. Specify the contrast as a number within the range of 1 (low [soft]) to 255 (high [sharp]). Increasing this value makes the contrast sharper. Scan Type Selects the scanning method. ADF (Front Side) Scans only the front sides of documents. ADF (Back Side) Scans only back sides of documents. ADF (Duplex) Scans both front and the back sides of documents. When this option is selected, the both sides of documents are scanned simultaneously. This option can be used only for the models that support duplex scanning. Flatbed Scans documents placed on the Flatbed. 1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 All Rights Reserved, Copyright (C) PFU LIMITED 2003